Message: Translator's Workbench is not running! Thread poster: Dina Abdo
| Dina Abdo Palestine Local time: 09:33 Member (2005) Arabic + ...
Hi, This may sound ... I don't know ... I just got Trados demo to try it and installed it. IT IS opened, and my Word file for translation IS open ... I followed all the steps required to start working, but once I click on the open or open/get button, I get this message: Trados Translator's Workbench is not running What did I do wrong Now? | | | Ralf Lemster Germany Local time: 08:33 English to German + ... Moving the topic... | Nov 11, 2006 |
What did I do wrong Now?
Posted in the wrong forum... Will move it to SDL Trados Support. Best regards, Ralf | | | Dina Abdo Palestine Local time: 09:33 Member (2005) Arabic + ... TOPIC STARTER
Ralf Lemster wrote: Posted in the wrong forum... Will move it to SDL Trados Support. Ralf Thanks Ralf | | |
The message you get sounds weird as you should probably get a message that's different from the one you quoted. But could it be that you have not yet made up a TM in Workbench? If you don't have a TM to work with, or if no TM is open, that might be why you're getting the eror message. In Workbench, click File > New, and then make up a TM (translation memory). It doesn't matter if you have nothing to add to it yet - that's what Workbench does: add units to the TM. Make s... See more The message you get sounds weird as you should probably get a message that's different from the one you quoted. But could it be that you have not yet made up a TM in Workbench? If you don't have a TM to work with, or if no TM is open, that might be why you're getting the eror message. In Workbench, click File > New, and then make up a TM (translation memory). It doesn't matter if you have nothing to add to it yet - that's what Workbench does: add units to the TM. Make sure the newly created TM is open and try again. All the best! ▲ Collapse | |
|
|
Dina Abdo Palestine Local time: 09:33 Member (2005) Arabic + ... TOPIC STARTER Not that ... | Nov 12, 2006 |
Viktoria Gimbe wrote: The message you get sounds weird as you should probably get a message that's different from the one you quoted. But could it be that you have not yet made up a TM in Workbench? If you don't have a TM to work with, or if no TM is open, that might be why you're getting the eror message. In Workbench, click File > New, and then make up a TM (translation memory). It doesn't matter if you have nothing to add to it yet - that's what Workbench does: add units to the TM. Make sure the newly created TM is open and try again. All the best! I created a new memory ... that's not the problem. On my screen, and according to the steps specified in the tutorial, I did everything right ... but the Trados looks like it's just isn't there to Word! I can see its tool bar, but the problem is still there! | | | Marta Fernandez-Suarez (X) United Kingdom Local time: 07:33 English to Spanish maybe this... | Nov 12, 2006 |
Hi The only time I get this message is when I am reading a Word file and click on some Trados command by mistake. The message is telling you that you haven't got Trados open. It is not possible to just open the Word file and use the Trados commands. One has to open both, the Word file and WorkBench (if it is WB what you are required to work with). Once you have open both, open your newly created memory or the memory the customer sent you from WB, and, you are ready. ... See more Hi The only time I get this message is when I am reading a Word file and click on some Trados command by mistake. The message is telling you that you haven't got Trados open. It is not possible to just open the Word file and use the Trados commands. One has to open both, the Word file and WorkBench (if it is WB what you are required to work with). Once you have open both, open your newly created memory or the memory the customer sent you from WB, and, you are ready. I hope this was an easy one and that is all you needed. Good luck! Regards, Marta ▲ Collapse | | | Dina Abdo Palestine Local time: 09:33 Member (2005) Arabic + ... TOPIC STARTER Not that either! | Nov 12, 2006 |
Marta Fernandez-Suarez wrote: Once you have open both, open your newly created memory or the memory the customer sent you from WB, and, you are ready. Marta I'm sorry Marta, but the workbench IS opened! | | | Make sure you have the Trados template in your Startup folder | Nov 12, 2006 |
I have lost my Trados template before and that caused a problem similar to yours. You should go to C:\Documents and Settings\\Application Data\Microsoft\Word\STARTUP - or something similar (I use WinXP and Office2000). In that folder, you should have a Word template called TRADOS7.dot (replace the number by whichever Trados version you are using). If it's not there, that is what's wrong. You have to find the template and put it in your Startup folder. For Trados 7.0 and above, it s... See more I have lost my Trados template before and that caused a problem similar to yours. You should go to C:\Documents and Settings\\Application Data\Microsoft\Word\STARTUP - or something similar (I use WinXP and Office2000). In that folder, you should have a Word template called TRADOS7.dot (replace the number by whichever Trados version you are using). If it's not there, that is what's wrong. You have to find the template and put it in your Startup folder. For Trados 7.0 and above, it should be here: C:\Program Files\SDL International\T2006_FL\TT\Templates Now, you also need to check whether the template is active in Word. In Word2000, you just need to fo to Tools > Templates & Add-Ins to get a list of templates in your Startup folder. Locate TRADOS7.dot and make sure you check the checkbox next to it. Now, to make sure all is correct, close both programs and restart Workbench and Word. Does this work for you? ▲ Collapse | |
|
|
it might be the language | Nov 13, 2006 |
Dina, Workbench does not work if your target language in word is different from the target language in the TM you are using. Ex: if your language in word is US English, and the target language in the TM you have is British Englsih, workbench will not work. Try it. Mireille | | | Dina Abdo Palestine Local time: 09:33 Member (2005) Arabic + ... TOPIC STARTER Still the problem here! | Nov 14, 2006 |
Viktoria and Merille, Thank you both for your responses. I checked all what you said and it's all fine ... but the problem is still there ... Translator's Workbench is not running!!!!!! I don't know what was I thinking trying to use a CAT ... I was doing fine without adding another problem to this computer ::'(: | | | Claire FRADET (X) France Local time: 08:33 English to French + ... IT MIGHT BE YOUR ANTIVIRUS | Nov 20, 2006 |
Hello, Believe me, I know what you're going through! I had the exact same problem, and it took 10 days to the support team to find the solution: my firewall was blocking the application! So: first desactivate your antivirus (even if your computer says it's not recommanded), open Word, open Workbench and your TM, and then try to open a segment... I think it should be OK now! If it works, then you'll have to do that each time you work with Trados, or change your fi... See more Hello, Believe me, I know what you're going through! I had the exact same problem, and it took 10 days to the support team to find the solution: my firewall was blocking the application! So: first desactivate your antivirus (even if your computer says it's not recommanded), open Word, open Workbench and your TM, and then try to open a segment... I think it should be OK now! If it works, then you'll have to do that each time you work with Trados, or change your firewall! Regards, Claire ▲ Collapse | | | Dina Abdo Palestine Local time: 09:33 Member (2005) Arabic + ... TOPIC STARTER IT WORKED :) | Nov 22, 2006 |
kro_mon wrote: Hello, Believe me, I know what you're going through! I had the exact same problem, and it took 10 days to the support team to find the solution: my firewall was blocking the application! So: first desactivate your antivirus (even if your computer says it's not recommanded), open Word, open Workbench and your TM, and then try to open a segment... I think it should be OK now! If it works, then you'll have to do that each time you work with Trados, or change your firewall! Regards, Claire Worked perfectly ... thanks a million Claire | |
|
|
libhf United States Local time: 02:33 English to Arabic + ... Trados Workbench is not running | Mar 18, 2007 |
I am now encountering the same problem. I was working in Trados 7.1 on my laptop and did not experience any problems. I have the same software on my desktop under the one extra license that Trados allows the same user. So I know it is not an issue of the license file. Word version in both laptop and desktop cases is the same--2003. I uninstalled and reinstalled Word, made sure that the Trados template was in the Word startup folder, and that the Trados app... See more I am now encountering the same problem. I was working in Trados 7.1 on my laptop and did not experience any problems. I have the same software on my desktop under the one extra license that Trados allows the same user. So I know it is not an issue of the license file. Word version in both laptop and desktop cases is the same--2003. I uninstalled and reinstalled Word, made sure that the Trados template was in the Word startup folder, and that the Trados application was running under the softkey license. But it keeps happening. Following suggestions in this thread, I disabled anti-Virus, and disabled Windows Firewall. My operating system is Win XP Service pack 2--same as on the laptop. No change. I keep getting the stubborn error message. Please keep in mind that the Trados toolbar and the Trados menu are both visible in Word. I do have earlier versions of Trados and Office. I am seriously thinking of downgrading in an attempt to resolve the issue. I wonder if anyone is out there that can shed some light on the subject. Many thanks, Hikmat Faraj Dina Abdo wrote: kro_mon wrote: Hello, Believe me, I know what you're going through! I had the exact same problem, and it took 10 days to the support team to find the solution: my firewall was blocking the application! So: first desactivate your antivirus (even if your computer says it's not recommanded), open Word, open Workbench and your TM, and then try to open a segment... I think it should be OK now! If it works, then you'll have to do that each time you work with Trados, or change your firewall! Regards, Claire Worked perfectly ... thanks a million Claire
[Edited at 2007-03-19 11:23] ▲ Collapse | | | Possible solution for message "Workbench is not running" in Word | Jul 4, 2008 |
Dear all, I ran into this error message as well when I had just reinstalled everything on my computer. It turned out registration wasn't working properly (but since it goes so fast you can hardly read the error messages that appear in the terminal window that shows the registration process and no special error message appears after an unsuccessful registration). The solution for me was to log onto Windows as a user with administrator privileges. Then I just had to Regi... See more Dear all, I ran into this error message as well when I had just reinstalled everything on my computer. It turned out registration wasn't working properly (but since it goes so fast you can hardly read the error messages that appear in the terminal window that shows the registration process and no special error message appears after an unsuccessful registration). The solution for me was to log onto Windows as a user with administrator privileges. Then I just had to Register Trados there and that's all. I was able to start using Trados without problems. I realise this advice probably comes to late for those of you who posted the question, but I hope it will help other translators in the future. Kind regards, Mariëtte van Drunen ▲ Collapse | | | To report site rules violations or get help, contact a site moderator: You can also contact site staff by submitting a support request » Message: Translator's Workbench is not running! CafeTran Espresso | You've never met a CAT tool this clever!
Translate faster & easier, using a sophisticated CAT tool built by a translator / developer.
Accept jobs from clients who use Trados, MemoQ, Wordfast & major CAT tools.
Download and start using CafeTran Espresso -- for free
Buy now! » |
| Trados Studio 2022 Freelance | The leading translation software used by over 270,000 translators.
Designed with your feedback in mind, Trados Studio 2022 delivers an unrivalled, powerful desktop
and cloud solution, empowering you to work in the most efficient and cost-effective way.
More info » |
|
| | | | X Sign in to your ProZ.com account... | | | | | |