GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW) | ||||||
---|---|---|---|---|---|---|
|
02:38 Feb 21, 2005 |
English language (monolingual) [PRO] Tech/Engineering - Mechanics / Mech Engineering | |||||||
---|---|---|---|---|---|---|---|
|
| ||||||
| Selected response from: TranslatonatoR Local time: 19:24 | ||||||
Grading comment
|
SUMMARY OF ALL EXPLANATIONS PROVIDED | ||||
---|---|---|---|---|
4 | yes, as opposed to a set/defined specific tolernace hole di |
|
yes, as opposed to a set/defined specific tolernace hole di Explanation: Hole tolerance: If possible, do not specify hole size tolerances any smaller than +/-.003. Boards are usually pre-drilled .003 to .004 larger than the finished holes size to allow for copper plating inside the hole www.pdcamerica.com/pricing.htm Drilled hole size- Finished hole size plus 3 mils for plating (1.5 mils per side) plus drill size tolerance. Drilled hole tolerance is +- ½ mil based on input from Procket’s main suppliers. Because this is such a small error, it does not need to be included. The 12 mil manufacturing tolerance more than accounts for this. www.speedingedge.com/PDF-Files/ anatomy%20of%20a%20plated%20hole.pdf -------------------------------------------------- Note added at 3 hrs 54 mins (2005-02-21 06:33:00 GMT) -------------------------------------------------- diameter |
| |
Grading comment
| ||
Login to enter a peer comment (or grade) |
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.