GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW) | ||||||
---|---|---|---|---|---|---|
|
22:03 Oct 9, 2006 |
English to French translations [PRO] Tech/Engineering - Mechanics / Mech Engineering / Piping | |||||||
---|---|---|---|---|---|---|---|
|
| ||||||
| Selected response from: Daniel Marquis | ||||||
Grading comment
|
Summary of answers provided | ||||
---|---|---|---|---|
4 +2 | fabricators of flanged pipe sections |
| ||
5 | fabricants de tronçons de tuyauteries |
| ||
3 | spool fabricators |
|
Discussion entries: 1 | |
---|---|
spool fabricators Explanation: If it is a request from French to English |
| |
Login to enter a peer comment (or grade) |
fabricators of flanged pipe sections Explanation: The results of my Googling are given below. "Spool" appears to be used with a variety of meanings in relation to pipes, but my final conclusion is that it is a length of pipe fabricated for flange-bolting to others similar elements. coiled tubing A long, continuous length of pipe wound on a spool. The pipe is straightened prior to pushing into a wellbore and recoiled to spool the pipe back onto the transport and storage spool. Depending on the pipe diameter (1 in. to 4 1/2 in.) and the spool size, coiled tubing can range from 2000 ft to 15,000 ft [610 to 4570 m] or greater length Spool: connection between a subsea pipeline and the platform riser, or between the terminations of two pipelines. http://www.saipem.eni.it/module.asp?pag=glossario Spool Piece: Any piece of pipe or shafting that can be removed from a line of piping or shafting without disturbing or disassembling any other components. ... www.vibinst.org/vglos_p-z.htm At the proper time, the driller must pull tension on the chain while a member of the floor crew holds some tension on the free end of the chain. This causes the new drillpipe joint to act like a spool, and as the driller pulls the chain on one end using the drawworks, the spool (or new pipe joint) turns and screws into the joint hung off in the slips. http://www.glossary.oilfield.slb.com/Display.cfm?Term=spinni... A test spool is a short pipe section that can be removed for internal inspection. Test spools may be used in a side stream or other locations where flow can ... ops.dot.gov/training/Glossary/Glossary%20S.htm www.bilko-automation.com/English/products/Fabricom/Weldless... - Everything at this site – which I cannot cut and paste – points to "spool" being a length of pipe, straight or bent. "Virole" could be the French equivalent. If you do a Google image search for "pipe" and "spool", you can see why it bears this name: it is a length of pipe with a flange at each end (in most cases). One of the photos is of a very short pipe, so short that, with the flanges, it resembles the bobbins of a sewing machine or the reels/spools power utilities have cable delivered on, etc. -------------------------------------------------- Note added at 21 mins (2006-10-09 22:25:10 GMT) -------------------------------------------------- Did you want to know what a pipe spool is or how it is said in French? -------------------------------------------------- Note added at 11 hrs (2006-10-10 10:01:42 GMT) -------------------------------------------------- The best I can think of, then, is "fabricateurs de viroles", but I can't get a lot of confirmation for that. Maybe something with "chaudronniers"? -------------------------------------------------- Note added at 12 hrs (2006-10-10 10:10:42 GMT) -------------------------------------------------- Howzabout "chaudronnier-tuyauteur industriel"? VIROLE en tôle d'acier soudé, à DOUBLE BRIDE, pour anchrage entre tubulures avec porte d'inspection sur la virole, moteur sur une console avec tendeur de ... www.ventomatic.com/Groep2g-AX-BU-BUV-FR.htm FABRICATION DE VIROLES longues en acier au Cr Mo de forte épaisseur soudées par faisceau d'électrons (étude et réalisation d'un canon de soudage par faisceau d'électrons de 200 kW) (Fabrication of long cylindrical parts from thick Cr Mo steel plates welded by electron beam) (study, test and fabrication of an electron beam welding gun cat.inist.fr/?aModele=afficheN&cpsidt=98469 la FABRICATION DE VIROLES, de fonds et de plaques tubulaires. d’appareils sous pression, d’échangeurs de chaleur, de. condenseurs, d’autoclaves et de cuves. ... www.dynamicmaterials.com/data/brochures/NC French Clad Prod... Le TUYAUTEUR est un chaudronnier spécialiste des métaux roulés (tubes et tuyaux). Les formations préparant au métier de tuyauteur sont semblables à celles ... www.studya.com/formations_metiers/industrie/tuyauteur_indus... A partir d`un dossier technique, le TUYAUTEUR INDUSTRIEL préfabrique des éléments de tuyauteries. Sur le chantier, il en effectue le montage pour réaliser des lignes alimentant différents équipements industriels. A partir d`un dossier technique, vous préfabriquez des éléments de tuyauteries. Sur le chantier, vous en effectuez le montage pour réaliser des lignes alimentant différents équipements industriels. Vous travaillez au sol ou en hauteur, parfois dans des endroits difficiles d`accès, à l`air libre ou sous abri, souvent dans des conditions d`environnement nécessitant un strict respect des consignes de sécurité. L’activité de chantier peut vous conduire à effectuer des petits ou grands déplacements, nationaux voire internationaux et à travailler en dehors des horaires habituels. Généralement, vous formez une équipe avec un soudeur et quelquefois avec un monteur. http://www.afpa.fr/awi/jsp/metier/fiche.jsp?access=1&_WebVar... TUYAUTEUR-CHAUDRONNIER (PIPELINE TCHAD- CAMEROUN) -juillet 2003 -juillet 2004 :IPS PORT-GENTIL GABON Tuyauteur -chaudronnier(Rabit phase III) ... www.chaudronnerie.enligne-fr.com/mini_cv.php?code=debbc1344... vous êtes engagé comme apprenti tuyauteur par une compagnie de pipeline. Tuyauteur. ... mainsdessus.cb.travailavenir.ca/profiles/profile.cfm?lang=fr&noc=7213&site=graphic Chaudronnier Intitulés de la fonction : Chaudronnier aéronautique Opérateur en chaudronnerie Technicien en chaudronnerie et tuyauterie Chaudronnier option fer Tuyauteur industriel Métallier industriel Assembleur au plan industriel en chaudronnerie Finalités : Le chaudronnier déforme ou découpe après traçage le métal (métal en feuille, tôle, tube, profilé) et autres matériaux, à partir de plans, schémas ou pièces-modèles. Il utilise des outils à main et des machines appropriées (cisaille, rouleuse, plieuse, lunette de géomètre...)et effectue généralement les assemblages en utilisant différents procédés : pointage, soudage, rivetage, boulonnage, collage... Missions principales : Préparer la fabrication Réaliser en autonomie tout ou partie d'une fabrication Contrôler et réajuster http://www.mundetis-competences.com/outil_free_5.php?numouti... -------------------------------------------------- Note added at 12 hrs (2006-10-10 10:12:19 GMT) -------------------------------------------------- Maybe with "fabrication de viroles" in parentheses to home in on it. |
| |||||||||||||
16 hrs confidence:
Login or register (free and only takes a few minutes) to participate in this question. You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy. KudoZ™ translation helpThe KudoZ network provides a framework for translators and others to assist each other with translations or explanations of terms and short phrases.
See also: Search millions of term translations |