GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW) | ||||||
---|---|---|---|---|---|---|
|
04:19 Nov 7, 2003 |
English to French translations [Non-PRO] Science | |||||||
---|---|---|---|---|---|---|---|
|
| ||||||
| Selected response from: jemo United States Local time: 04:46 | ||||||
Grading comment
|
Summary of answers provided | ||||
---|---|---|---|---|
1 | substrat (support) thermoplastique thermofusible |
|
substrat (support) thermoplastique thermofusible Explanation: une tentative... -------------------------------------------------- Note added at 2003-11-07 06:10:53 (GMT) -------------------------------------------------- pour étayer le jargon: 1-Hot-melt: \"Polymères adhésifs thermofusibles ou hot melt Actes du colloque 8-10 Novembre 1993, Port-Jérome\" http://www.lavoisier.fr/notice/fr2877774690.html \"Adhésifs thermofusibles («Hot melt adhesives») http://www.usagers.umontreal.ca/begind/phase1/11_2_3_Adh_sif... souvent on trouve \"hot melt\" en français: \"Macromelt Moulding est un procédé nouveau de mise en oeuvre des Hot-Melt thermoplastique de la gamme Macromelt\" http://www.adola.com/f/produits/ On a aussi le \"low-melt\" \"Les colles 3M Jet-Melt sont à base de résine thermoplastique sans solvant. Elles deviennent liquides par apport de chaleur. Nous vous proposons une gamme complète d\'équipements d\'application fiables et faciles d\'utilisation. Deux sortes de colle vous sont proposées: Hot-melt: appliquée à 210°C. Low-melt: colle à bas point de fusion, 130°C, réduisant ainsi les risques de brûlure de l\'utilisateur et des matériaux sensibles \" http://www.haxoblun.fr/colles.htm 2-thermosoftening \" One way to classify polymers (plastics) is by their response to heat. All plastics can bemoulded when they are made, and then set hard into shape as they cool. After this,thermosoftening (also called thermoplastic) plastics can be remelted, and thenreshaped. Thermosetting plastics cannot be remelted and so cannot be reshapedonce they have been made\" http://216.239.37.104/search?q=cache:W0VQobbmbCoJ:www.chemso... \"Polymers may be classified as thermosoftening or thermosetting. Thermosoftening polymers are sometimes called thermoplastic.\" http://www.gcsescience.com/xo26a.htm Résultat des courses: thermosoftening=thermoplastique on pourra donc peut-être traduire par le tout substrat thermoplastique Hot-melt |
| |
Login to enter a peer comment (or grade) |
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.