GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW) | ||||||
---|---|---|---|---|---|---|
|
10:18 Nov 30, 2004 |
English to Polish translations [Non-PRO] Tech/Engineering - Automotive / Cars & Trucks / mower | |||||||
---|---|---|---|---|---|---|---|
|
| ||||||
| Selected response from: goodline Local time: 08:34 | ||||||
Grading comment
|
Summary of answers provided | ||||
---|---|---|---|---|
4 | wymienić smar / przesmarować... |
|
wymienić smar / przesmarować... Explanation: jeżeli ręcznie, to najpierw trzeba usunąć stary smar jeżeli towotnicą/smarownicą, to nowy smar wypchnie stary If the bearings are okay, repack them with wheel bearing grease. Clean both wheel bearings and repack with MP grease. ... Remove lubricator cup & fittings, clean & repack with soft soda based grease. just repacking them with new grease every two years. You must carefully disassemble the old joint, clean out all the old, contaminated grease and repack it with the new grease. EASE OF OPERATION AND ADJUSTMENT Maintenance: Ease of performing routine maintenance was very good. Grease fittings were provided for the gauge wheel castor pivots, lower pivot arms and the press wheel gangs. The lower pivot arms were greased every 10 hours. The castor pivots were greased every 100 hours and the press wheel bearings every 50 hours. |
| |
Grading comment
| ||
Login to enter a peer comment (or grade) |
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.