riding ring
Serbian translation: prsten za navodjenje
| GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW) | ||||||
|---|---|---|---|---|---|---|
|
| 15:46 Nov 8, 2008 |
| English to Serbian translations [PRO] Tech/Engineering - Mechanics / Mech Engineering | |||||||
|---|---|---|---|---|---|---|---|
|
| ||||||
|  Selected response from: amarok Serbia Local time: 09:31 | ||||||
Grading comment
| |||||||
| Summary of answers provided | ||||
|---|---|---|---|---|
| 3 +1 | prsten za navodjenje |
|
| Summary of reference entries provided | |||
|---|---|---|---|
| Riding ring (Rotary kiln) |
|
Answers
1 day 31 mins confidence: 
peer agreement (net): +1
peer agreement (net): +1prsten za navodjenje Explanation: po meni bi moglo ovako nesto da bude... jer je riding i navodjenje... |
| |
Grading comment
| ||
| Login to enter a peer comment (or grade) | ||
Reference comments
19 hrs |
| Reference: Riding ring (Rotary kiln) Reference information: Tyres and Rollers Tyres, sometimes called riding rings, usually consist of a single annular steel casting, machined to a smooth cylindrical surface, which attach loosely to the kiln shell through a variety of "chair" arrangements. These require some ingenuity of design, since the tyre must fit the shell snugly, but also allow thermal movement. The tyre rides on pairs of steel rollers, also machined to a smooth cylindrical surface, and set about half a kiln-diameter apart. The rollers must support the kiln, and allow rotation that is as nearly frictionless as possible. A well-engineered kiln, when the power is cut off, will swing pendulum-like many times before coming to rest. The mass of a typical 6 x 60 m kiln, including refractories and feed, is around 1100 tonnes, and would be carried on three tyres and sets of rollers, spaced along the length of the kiln. The longest kilns may have 8 sets of rollers, while very short kilns may have only two. Kilns usually rotate at 0.5 to 2 rpm, but sometimes as fast as 5 rpm. The Kilns of most modern cement plants are running at 4 to 5 rpm. The bearings of the rollers must be capable of withstanding the large static and live loads involved, and must be carefully protected from the heat of the kiln and the ingress of dust. In addition to support rollers, there are usually upper and lower "retaining (or thrust) rollers" bearing against the side of tyres, that prevent the kiln from slipping off the support rollers. Reference: http://en.wikipedia.org/wiki/Rotary_kiln#Tyres_and_Rollers Reference: http://upload.wikimedia.org/wikipedia/en/d/d0/CemKilnKiln.jp... |
| |
| Login to enter a peer comment (or grade) | ||
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.
KudoZ™ translation help
The KudoZ network provides a framework for translators and others to assist each other with translations or explanations of terms and short phrases.
See also:
Search millions of term translations