mordaza tape

03:31 Jul 2, 2007 

Curious though as the site has been translated? into English!!

03:30 Jul 2, 2007 

http://www.sten.es/ingles/productes/murosypilares/default.ht... I guess you have your answers here although it is still confusing which is which. 10 codes/8 pictures (no indication or codes to identify each picture).

16:13 Jul 1, 2007 

CONSTRUCTION MILLWRIGHT
Use of clamps, scribers, caliper ends. Checking procedures for internal and ..... Foundation layout and locating procedures; excavation, formwork, levels, ...
www.canlii.org/on/laws/regu/1990r.1048/20060614/whole.html - 83k - Cached - Similar pages

http://www.canlii.org/on/laws/regu/1990r.1048/20060614/whole...
(Vernier Tools)
Calipers, depth gauges, gear-tooth verniers, bevel protractors, inclinometers, height gauges. Checking, adjusting for accuracy.
Internal Measurement (Inside Calipers)
Types and usage; spring, firm-joint, lock-joint, transfer. Small hole and telescopic gauges. Inside calipers, vernier calipers, inside micrometers.
(Depth Gauges)
Micrometers, verniers, rule-type gauges.
(Gauge Blocks)
Types and use for slot and groove measurement. Feeler gauge use.
Angular Measurement
Types and use of protractors, sine bars, angle gauges, bevels, inclinometers, optical instruments.
Comparative Measurement (Squares)
Types and usage; try-square, combination, block, cylinder and optical. Checking methods.
(Straight edges)
Types and usage; fish-back, knife, dovetail, square, vee, combination. Use with feeler gauges, gauge blocks, dial indicators, surface plates, vee blocks, levels. Checking flat surfaces using marking, light, feeler gauges, dial indicators.

16:13 Jul 1, 2007 

Uuf! BristolTEC. I don't know: I have been looking for other sites using a combination of search factors (civil engineering, formworks, etc.). I came across these which I don't know if they will be of any use to you in determining what this is:

15:43 Jul 1, 2007 

Yes, sorry, it is confusing. My guess is the picture is top right (because it says "Regula una profundidad de hasta 25 cm." and the thing has a "prong" that looks adjustable to a depth. Why 8 pictures and 9 descriptions...? I really don't know!

14:56 Jul 1, 2007 

http://www.sten.es/productes/murosypilares/muros6.htm
There are 9 descriptions and eight pictures
I'll leave this one as I don't have a clue .... Good luck!

14:49 Jul 1, 2007 

I dunno ... but I'll look again.

14:48 Jul 1, 2007 

Would you be able to isolate a picture and post (was it not No. 6 - which look like a caliper/some measuring tool to me - ). The link posted is not accessible but I was able to see the pictures using a different method (I don't know which one then it is?

14:38 Jul 1, 2007 

These devices could look like measuring instruments, but they actually clamp metal formwork panels together.