| Pages in topic: [1 2] > | Termbase problem with SDL Trados Studio 2009 SP3 Thread poster: Svetlana Ryjikh
|
|---|
Dear Forum Members,
I can run Multiterm 2009, but can neither create a local termbase nor open one.
Whenever I try to run the Termbase Wizard to create a termbase, it finishes with an error message saying: error in getting COM class fabric for component with CLSID {5EE7FC2F-BE14-4979-AF01-76271D7EE291}, error 800736b1
Even the samples provided in the folder SDL MultiTerm with the installation cannot be opened (error message: A connection to SDL Multiterm Server unknown coul... See more Dear Forum Members,
I can run Multiterm 2009, but can neither create a local termbase nor open one.
Whenever I try to run the Termbase Wizard to create a termbase, it finishes with an error message saying: error in getting COM class fabric for component with CLSID {5EE7FC2F-BE14-4979-AF01-76271D7EE291}, error 800736b1
Even the samples provided in the folder SDL MultiTerm with the installation cannot be opened (error message: A connection to SDL Multiterm Server unknown could not be established. Please check you connection settings.) If I try opening the samples right from the folder SDL MultiTerm it ends up with the same error message: error in getting COM class fabric for component with CLSID {5EE7FC2F-BE14-4979-AF01-76271D7EE291}, error 800736b1
Everything worked fine before upgrading to SP3 version.
Thank you very much in advance for any ideas on how I could try to fix it!!! ▲ Collapse
| | | | Jerzy Czopik 
Germany
Local time: 16:51
Member (2003)
Polish to German
+ ...
| After opening MT please check if any servers are entered | Nov 14, 2010 |
Press CTRL+SHIFT+E and remove any server you may find there.
As for the other issue: please locate the Side by Side tools in the Multiterm program group and start with Activating MT 2009. If this does not help use Repari MT 2009.
| | | | | Thanks, I tried all you said, but it did not help. | Nov 14, 2010 |
Thank you so much for your prompt reply! When I pressed CTRL+SHIFT+E, there was nothing to remove, since no server was specified therein. When I tried to run the Activate MT 2009 task, it ended up with the following message: Activating SDL MultiTerm 2009 failed. Problem executing command: C:\Windows\System32\regsvr32.exe /s "C:\Program Files\Common Files\SDL\MultiTerm8\MultiTermMtServer\MultiTermMtServer.dll"
The file can't be found.
The Repair MT also failed and produced three erro... See more Thank you so much for your prompt reply! When I pressed CTRL+SHIFT+E, there was nothing to remove, since no server was specified therein. When I tried to run the Activate MT 2009 task, it ended up with the following message: Activating SDL MultiTerm 2009 failed. Problem executing command: C:\Windows\System32\regsvr32.exe /s "C:\Program Files\Common Files\SDL\MultiTerm8\MultiTermMtServer\MultiTermMtServer.dll"
The file can't be found.
The Repair MT also failed and produced three error-messages:
Problem executing command: C:\Windows\System32\regsvr32.exe /u /s "C:\Program Files\Common Files\SDL\MultiTerm8\MultiTermMtServer\MultiTermMtServer.dll"
The file can't be found.
Problem executing command: C:\WINDOWS\system32\msiexec.exe /f {A1CC3003-50E3-4EBA-965A-377250B576BF} /l*v "C:\Program Files\SDL\SDL MultiTerm\MultiTermSideBySide\Reinstalling 2009 core.log"
Problem executing command: C:\WINDOWS\system32\msiexec.exe /f {6416EEE2-6332-45FC-B63B-8E14F8A73991} /l*v "C:\Program Files\SDL\SDL MultiTerm\MultiTermSideBySide\Reinstalling Studio 2009.log"
What else can I do? Shall I try to uninstall the whole thing and reinstall it all over again? Should I return my license first or it’s not required if I uninstall just MT, but keep all the rest SDL progs on my PC ? ▲ Collapse
| | | | Jerzy Czopik
Germany
Local time: 16:51
Member (2003)
Polish to German
+ ...
| Please try to reinstall only MT without deinstalling anything first | Nov 14, 2010 |
Just run the installer again, maybe that will help.
If not, I must admit that we do have a serious problem here.
| | |
|
|
|
Walter Blaser
Switzerland
Local time: 16:51
French to German
+ ...
| Uninstall and reinstall | Nov 14, 2010 |
Svetlana Ryjikh wrote:
Thank you so much for your prompt reply! When I pressed CTRL+SHIFT+E, there was nothing to remove, since no server was specified therein. When I tried to run the Activate MT 2009 task, it ended up with the following message: Activating SDL MultiTerm 2009 failed. Problem executing command: C:\Windows\System32\regsvr32.exe /s "C:\Program Files\Common Files\SDL\MultiTerm8\MultiTermMtServer\MultiTermMtServer.dll"
The file can't be found.
The Repair MT also failed and produced three error-messages:
Problem executing command: C:\Windows\System32\regsvr32.exe /u /s "C:\Program Files\Common Files\SDL\MultiTerm8\MultiTermMtServer\MultiTermMtServer.dll"
The file can't be found.
Problem executing command: C:\WINDOWS\system32\msiexec.exe /f {A1CC3003-50E3-4EBA-965A-377250B576BF} /l*v "C:\Program Files\SDL\SDL MultiTerm\MultiTermSideBySide\Reinstalling 2009 core.log"
Problem executing command: C:\WINDOWS\system32\msiexec.exe /f {6416EEE2-6332-45FC-B63B-8E14F8A73991} /l*v "C:\Program Files\SDL\SDL MultiTerm\MultiTermSideBySide\Reinstalling Studio 2009.log"
What else can I do? Shall I try to uninstall the whole thing and reinstall it all over again? Should I return my license first or it’s not required if I uninstall just MT, but keep all the rest SDL progs on my PC ?
Svetlana
Looking at your error messages, I suggest that you completely uninstall all Multiterm components from the Control Panel, all components that have 'Multiterm' in their name, but not Studio.
Then reinstall Multiterm using the latest Installer (SP3 = build 166). Once you have done this, apply the "Cumulative Updates" that have been released last Friday,
http://kb.sdl.com/article.aspx?article=3390&p=1
http://kb.sdl.com/article.aspx?article=3397&p=1
Make sure you run the installers with administrative rights.
This should solve your problem.
Walter
| | | | | Thank you, but it did not help either. | Nov 14, 2010 |
Thanks for your help so much! You are the only one who tried to answer my question so far. I tried to reinstall it without deinstalling and at the end got a message that reinstallation went out successful. But now I get the following error message even before I run MT: error in getting COM class fabric for component with CLSID {218607FO-58OD-43A4-B75E-AB028624D9D880040154}, error 80040154. And all the rest problems still remain. In addition, now every time I open and close MS Word I get the foll... See more Thanks for your help so much! You are the only one who tried to answer my question so far. I tried to reinstall it without deinstalling and at the end got a message that reinstallation went out successful. But now I get the following error message even before I run MT: error in getting COM class fabric for component with CLSID {218607FO-58OD-43A4-B75E-AB028624D9D880040154}, error 80040154. And all the rest problems still remain. In addition, now every time I open and close MS Word I get the following error messages: “Compile error in hidden module: AutoExec” and “Compile error in hidden module: MTMultiTermMenu”, respectively.
I’ve made a bunch of screenshots already. I'm going to contact the firm in Saint-Petersburg, Russia first thing tomorrow morning, where I bought the license. Definitely, I can not handle it myself. ▲ Collapse
| | | | | Thank you, Sir! I'm going to follow your advice. | Nov 14, 2010 |
I'll follow your advice and let you know later, whether I'm successful.
| | | | Jerzy Czopik
Germany
Local time: 16:51
Member (2003)
Polish to German
+ ...
| Follow Walter's advice | Nov 14, 2010 |
However, after having uninstalled all the stuff he suggests please check also, which Java versions are installed on your system. Leave JUST 1.5.0_10 and 1.6.0_14, uninstall everything else.
Then run regedit and rename the following keys:
HKEY_CURRENT_USER\Software\SDL\MultiTerm8 to HKEY_CURRENT_USER\Software\SDL\_MultiTerm8
HKEY_CURRENT_USER\Software\Trados\MultiTerm to HKEY_CURRENT_USER\Software\Trados\_MultiTerm
Now reinstall the software.
When installing t... See more However, after having uninstalled all the stuff he suggests please check also, which Java versions are installed on your system. Leave JUST 1.5.0_10 and 1.6.0_14, uninstall everything else.
Then run regedit and rename the following keys:
HKEY_CURRENT_USER\Software\SDL\MultiTerm8 to HKEY_CURRENT_USER\Software\SDL\_MultiTerm8
HKEY_CURRENT_USER\Software\Trados\MultiTerm to HKEY_CURRENT_USER\Software\Trados\_MultiTerm
Now reinstall the software.
When installing the patch, please be sure to download and install the C++ components mentioned there. ▲ Collapse
| | |
|
|
|
| The error is still there | Nov 14, 2010 |
I got your answer about Java version checking a bit later, after I’d already started the reinstallation. The error is still there. The good thing is that now I don't have error-messages every time I open/close MS Word. I’m going to check on Java versions, rename files in regedit and reinstall Multiterm once again tomorrow night, when I get home from work. I’ll let you guys know whether I’m successful and what the help-desk in Saint-Petersburg will advise me, if I get any reply at all. No... See more I got your answer about Java version checking a bit later, after I’d already started the reinstallation. The error is still there. The good thing is that now I don't have error-messages every time I open/close MS Word. I’m going to check on Java versions, rename files in regedit and reinstall Multiterm once again tomorrow night, when I get home from work. I’ll let you guys know whether I’m successful and what the help-desk in Saint-Petersburg will advise me, if I get any reply at all. Now I feel really exhausted. But you guys are great! Thank you both. ▲ Collapse
| | | | Jerzy Czopik
Germany
Local time: 16:51
Member (2003)
Polish to German
+ ...
| Word is not connected to Multiterm | Nov 14, 2010 |
There is just a Word template installed - I would completly remove it unless you really MUSt use Word as a CAT tool, which is nowadays simply ridiculous.
Regarding your error messages I must unfortunately admit, that beside removing all applications from SDL and Java VMs no solution appears to me.
Did you try restoring Windows to a date before you installed the upgrade?
| | | | | I've got in touch with Tra-service support team | Nov 15, 2010 |
Today, I’ve got in touch with the firm in Saint-Petersburg where I bought SDL license. As they replied me via e-mail, my case had been forwarded to SDL specialists. I’m going to wait for any answer for a couple of days before starting complete reinstallation. Maybe, they will come up with another solution. If they don't, I have two options, as far as I see it: reinstall it on my PC and if it does not run properly, try reinstalling it on another PC. If it's ok there, the problem is with my co... See more Today, I’ve got in touch with the firm in Saint-Petersburg where I bought SDL license. As they replied me via e-mail, my case had been forwarded to SDL specialists. I’m going to wait for any answer for a couple of days before starting complete reinstallation. Maybe, they will come up with another solution. If they don't, I have two options, as far as I see it: reinstall it on my PC and if it does not run properly, try reinstalling it on another PC. If it's ok there, the problem is with my computer and SDL-MT-soft is fine. I'll write about it, as soon as I get to the end of it, so that it might help somebody else later. Thank you so much for your help! ▲ Collapse
| | | | | Same problem here after updating SDL MultiTerm 2009 SP3 | Nov 15, 2010 |
After updating I cannot open my termbases any more. I get always the message:
"A connection to SDL MultiTerm Server unknown could not be established.
Please check your connection settings."
I did not enter any servers ever and the "Servers..." window is empty.
My PC runs under Windows XP.
Hopefully the answer Svetlana gets will help me too.
Kind regards
Liselotte
| | |
|
|
|
| Server vs. Local | Nov 15, 2010 |
Liselotte K. de Hennig wrote:
After updating I cannot open my termbases any more. I get always the message:
"A connection to SDL MultiTerm Server unknown could not be established.
Please check your connection settings."
Hello Liselotte,
are you sure you are trying to open a local termbase and not a server-based one?
| | | | Walter Blaser
Switzerland
Local time: 16:51
French to German
+ ...
| What termbases do you want to access? | Nov 15, 2010 |
Which termbases did you use before you updated? Local ones or server-based ones?
If you connected to server-based termbases on a Multiterm Server of your customer, you have to make sure that your customer also upgraded his server to SP3, otherwise you will not be able to connect anymore. For server-based termbases and TMs, the client and the server MUST be on exactly the same level because the communication protocol has been changed.
This means that you have to make su... See more Which termbases did you use before you updated? Local ones or server-based ones?
If you connected to server-based termbases on a Multiterm Server of your customer, you have to make sure that your customer also upgraded his server to SP3, otherwise you will not be able to connect anymore. For server-based termbases and TMs, the client and the server MUST be on exactly the same level because the communication protocol has been changed.
This means that you have to make sure that your customer also has upgraded his server to SP3. If he has not done so yet and does not intend to do so very soon, you will need to revert back to SP2 in order to be able to connect to his server.
Should you however use local termbases only, go to 'File - Servers' and delete any server connection you have there.
Walter ▲ Collapse
| | | | | My local termbases | Nov 15, 2010 |
I am really trying to open only my local termbases the same way I always did. I did not use server based termbases ever. The MultiTerm has no Files - Servers but Termbase - Servers... (Ctrl + Shift + E). The window that opens, called "Servers..." is empty.
Thanks a lot for trying to help me.
Kind regards
Liselotte
| | | | | Pages in topic: [1 2] > | To report site rules violations or get help, contact a site moderator: You can also contact site staff by submitting a support request » Termbase problem with SDL Trados Studio 2009 SP3 | Trados Studio 2022 Freelance | The leading translation software used by over 270,000 translators.
Designed with your feedback in mind, Trados Studio 2022 delivers an unrivalled, powerful desktop
and cloud solution, empowering you to work in the most efficient and cost-effective way.
More info » |
| | CafeTran Espresso | You've never met a CAT tool this clever!
Translate faster & easier, using a sophisticated CAT tool built by a translator / developer.
Accept jobs from clients who use Trados, MemoQ, Wordfast & major CAT tools.
Download and start using CafeTran Espresso -- for free
Buy now! » |
|
| | | | X Sign in to your ProZ.com account... | | | | | |
Login to reply/comment 
Translation news related to SDL Trados
