Error after installing SP2R
Thread poster: Marcel Milic

Marcel Milic  Identity Verified
Slovenia
Local time: 12:26
English to Slovenian
+ ...
Sep 20, 2012

Hi!
After installing SP2R I get error message. Error log says:


Could not load file or assembly 'Sdl.Core.LanguageProcessing, Version=1.0.0.0, Culture=neutral, PublicKeyToken=c28cdb26c445c888' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)

System.IO.FileLoadException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Sdl.Core.LanguageProcessing, Version=1.0.0.0, Culture=neutral, PublicKeyToken=c28cdb26c445c888
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].


Sdl.Verification.QAChecker
c__DisplayClass2.b__0()
at Sdl.Desktop.Platform.Implementation.Services.Log.Resources(Object message, Action action)
at Sdl.Desktop.Platform.Implementation.CommandBars.ActionService.ExecuteAction(IAction action, ActionOrigin origin, Boolean allowToggle)
at Sdl.Desktop.Platform.Implementation.CommandBars.ActionService.ExecuteActionForShortcut(Keys shortcut)
at Sdl.Desktop.Platform.WinForms.StudioWindowForm.OnKeyDown(KeyEventArgs e)
at System.Windows.Forms.Control.ProcessKeyEventArgs(Message& m)
at System.Windows.Forms.Form.ProcessKeyPreview(Message& m)
at System.Windows.Forms.Control.ProcessKeyPreview(Message& m)
at System.Windows.Forms.Control.ProcessKeyPreview(Message& m)
at System.Windows.Forms.Control.ProcessKeyPreview(Message& m)
at System.Windows.Forms.Control.ProcessKeyPreview(Message& m)
at System.Windows.Forms.Control.ProcessKeyPreview(Message& m)
at System.Windows.Forms.Control.ProcessKeyPreview(Message& m)
at System.Windows.Forms.Control.ProcessKeyPreview(Message& m)
at System.Windows.Forms.Control.ProcessKeyPreview(Message& m)
at System.Windows.Forms.Control.ProcessKeyPreview(Message& m)
at System.Windows.Forms.Control.ProcessKeyPreview(Message& m)
at System.Windows.Forms.Control.ProcessKeyPreview(Message& m)
at System.Windows.Forms.Control.ProcessKeyPreview(Message& m)
at System.Windows.Forms.Control.ProcessKeyPreview(Message& m)
at System.Windows.Forms.Control.ProcessKeyPreview(Message& m)
at System.Windows.Forms.Control.ProcessKeyPreview(Message& m)
at System.Windows.Forms.Control.ProcessKeyPreview(Message& m)
at System.Windows.Forms.Control.ProcessKeyMessage(Message& m)
at System.Windows.Forms.Control.WmKeyChar(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)]]>


SDL Trados Studio
10.0.0.0
10.2.3046.0
Microsoft Windows 7 Ultimate
Service Pack 1
1033
1250
2.0.50727.5456
True
4192760 MB




I already tried to repair MS c++ Redistributable 2008 by running 2008SP1vcredist_x86.exe.
Unfortunately it didn't help.

Any idea how to solve it?
Thank you!
Marcel


 

septima
Local time: 12:26
.NET Sep 20, 2012

It looks more like a problem with your .NET installation/assemblies, presumably 2.0.

An excellent small, free .NET verification tool is generously provided by Aaron Stebner:

http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx

As a first step it might be good to download the verifier and see whether all your .NET installations are okay (each one takes about a minute to test from the dropdown list). Each one is individual, not cumulative: 1.0, 2.0... 4.5. Probably everything up to 4.0 needs to be working.

Whenever you uninstall a big program it can make a mess of your .NET setup.

If they're all okay, then finding the assembly bind failure would I guess be the next step.

... or just uninstall the darned thing and keep re-installing it till it works icon_smile.gif


 

Marcel Milic  Identity Verified
Slovenia
Local time: 12:26
English to Slovenian
+ ...
TOPIC STARTER
No progress Sep 21, 2012

septima, thx for your suggestion
Seems that everything is OK.
I have downloaded .NET 4.0 and repaired it. Restarted the computer and started Trados again. Everything is as it was before.
Same error.


 

SDL Community  Identity Verified
United Kingdom
Local time: 12:26
English
I would suggest you raise a case... Sep 21, 2012

... with SDL Support. You are entitled to free installation support which you can access through the solution finder. Go to the Knowledgebase;

http://kb.sdl.com

Then go to the tab called Solution Finder and now go here;

Download & Installation Problems
- The installation went fine, but now I get an error message when opening or using the program.
-- The error occurs in SDL Trados Studio 2011

You can fill out the form and a support engineer will be able to assist you.

Regards

Paul


 

Marcel Milic  Identity Verified
Slovenia
Local time: 12:26
English to Slovenian
+ ...
TOPIC STARTER
I just did ... Sep 21, 2012

... raise a case.
Thank you!
I hope help will get ASAP.icon_smile.gif
Wish you all nice day
Marcel


 

silviavassallo Vassallo
Italy
Local time: 12:26
English to Italian
+ ...
Problem status Oct 8, 2012

I happen to have the same problem, how did you solve it?

 

Marcel Milic  Identity Verified
Slovenia
Local time: 12:26
English to Slovenian
+ ...
TOPIC STARTER
I had to reinstall the software ... Oct 8, 2012

... according to the advice given from SDL support.
I had to uninstall previous version. Unfortunately it was not enough and I had to clean registry too. Part of it using software and part of it manually.
After that I downloaded SP2R (Studio and MTD) and installed it again.
Now it works fine!
icon_biggrin.gif


 

Linda Karssies  Identity Verified
Local time: 20:26
Member (2010)
English to Dutch
+ ...
I needed SDL Trados customer support to solve this issue. May 22, 2013

Hi,

I had the same issue when I recently installed SP2R. I put in a request for free installation support through the solution finder. Go to the Knowledgebase; http://kb.sdl.com.
Within 3 days a service representative responded. Fortunately that weekend I had no important jobs I missed. He did a remote desktopjob of about an hour and a half and all is working properly again. It seemed to be a mismatch involving Microsoft Windows .NET.

Regards,

Linda


 


To report site rules violations or get help, contact a site moderator:


You can also contact site staff by submitting a support request »

Error after installing SP2R

Advanced search







PerfectIt consistency checker
Faster Checking, Greater Accuracy

PerfectIt helps deliver error-free documents. It improves consistency, ensures quality and helps to enforce style guides. It’s a powerful tool for pro users, and comes with the assurance of a 30-day money back guarantee.

More info »
memoQ translator pro
Kilgray's memoQ is the world's fastest developing integrated localization & translation environment rendering you more productive and efficient.

With our advanced file filters, unlimited language and advanced file support, memoQ translator pro has been designed for translators and reviewers who work on their own, with other translators or in team-based translation projects.

More info »



Forums
  • All of ProZ.com
  • Term search
  • Jobs
  • Forums
  • Multiple search