deadleg

Turkish translation: kör bağlantı / kör nokta

GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW)
English term or phrase:deadleg
Turkish translation:kör bağlantı / kör nokta
Entered by: Taner Göde

08:26 Feb 8, 2007
English to Turkish translations [PRO]
Tech/Engineering - Engineering (general)
English term or phrase: deadleg
Su testi için örnek alınmak üzere açılan portlar ile ilgili bir bağlamda "deadleg" olarak geçiyor. Şimdiden teşekkürler.
Deniz Oygur
Local time: 16:48
kör bağlantı / kör nokta
Explanation:
Abstract - Deadlegs are defined as the inactive portion of the pipe where the flow is stagnant. Corrosion in deadlegs occurs as a result of water separation due to the very low flow velocity. The present work provides an investigation of the effect of deadleg geometry and average flow velocity on flow field and oil/water separation in deadlegs. The investigation is based on the solution of the mass and momentum conservation equations of an oil/water mixture together with the volume fraction equation for the secondary phase. A fluid flow model based on the time-averaged governing equations of 3-D turbulent flow has been developed. An algebraic slip mixture model is utilized for the calculation of the two immiscible fluids (water and crude oil). The model solves the continuity and momentum equations for the mixture, and the volume fraction equation for the secondary phase utilizing an algebraic expression for the relative velocity. Flow visualization experiments were conducted in order to validate the numerical procedure.

Deren Kimya- Teknik Terimler SözlüğüKör bağlantı/ Kör nokta: İçinden su akışının olmadığı, bir ucu kapalı boru ... c) ve soğutma sistemi ile ilişkili her türlü tank, boru hattı, vana, ...
www.derenkimya.com.tr/06-sozluk.asp - 16k - Önbellek - Benzer sayfalar

mssu_teknikbilgilerİstenilen boru kolaylıkla kör boru olarak ayarlanabilir. ... Düğüm noktası ölü noktaya, ölü nokta düğüm noktasına değiştirilebilir, ...
www.bgsbilgi.com.tr/mssu/mssu_teknikbilgiler.htm - 35k - Önbellek - Benzer sayfalar

[DOC] 3T1 KÜÇÜK TEKNE KULLANIMIDosya Biçimi: Microsoft Word - HTML olarak görüntüle
Böylece kör nokta kalmaması sağlanır. Başka bir yöntem ise; ... Vana kapatılırken hava kaçırmayacak kadar bir kuvvet uygulamak yeterlidir. 1) Filtre kafası ...
www.tssf.gov.tr/binaries/3yildizdaliciegt.doc - Benzer sayfalar

Selected response from:

Taner Göde
Türkiye
Local time: 16:48
Grading comment
çok teşekkür ederim.
4 KudoZ points were awarded for this answer



Summary of answers provided
5 +3kör bağlantı / kör nokta
Taner Göde


  

Answers


36 mins   confidence: Answerer confidence 5/5 peer agreement (net): +3
kör bağlantı / kör nokta


Explanation:
Abstract - Deadlegs are defined as the inactive portion of the pipe where the flow is stagnant. Corrosion in deadlegs occurs as a result of water separation due to the very low flow velocity. The present work provides an investigation of the effect of deadleg geometry and average flow velocity on flow field and oil/water separation in deadlegs. The investigation is based on the solution of the mass and momentum conservation equations of an oil/water mixture together with the volume fraction equation for the secondary phase. A fluid flow model based on the time-averaged governing equations of 3-D turbulent flow has been developed. An algebraic slip mixture model is utilized for the calculation of the two immiscible fluids (water and crude oil). The model solves the continuity and momentum equations for the mixture, and the volume fraction equation for the secondary phase utilizing an algebraic expression for the relative velocity. Flow visualization experiments were conducted in order to validate the numerical procedure.

Deren Kimya- Teknik Terimler SözlüğüKör bağlantı/ Kör nokta: İçinden su akışının olmadığı, bir ucu kapalı boru ... c) ve soğutma sistemi ile ilişkili her türlü tank, boru hattı, vana, ...
www.derenkimya.com.tr/06-sozluk.asp - 16k - Önbellek - Benzer sayfalar

mssu_teknikbilgilerİstenilen boru kolaylıkla kör boru olarak ayarlanabilir. ... Düğüm noktası ölü noktaya, ölü nokta düğüm noktasına değiştirilebilir, ...
www.bgsbilgi.com.tr/mssu/mssu_teknikbilgiler.htm - 35k - Önbellek - Benzer sayfalar

[DOC] 3T1 KÜÇÜK TEKNE KULLANIMIDosya Biçimi: Microsoft Word - HTML olarak görüntüle
Böylece kör nokta kalmaması sağlanır. Başka bir yöntem ise; ... Vana kapatılırken hava kaçırmayacak kadar bir kuvvet uygulamak yeterlidir. 1) Filtre kafası ...
www.tssf.gov.tr/binaries/3yildizdaliciegt.doc - Benzer sayfalar




    Reference: http://cat.inist.fr/?aModele=afficheN&cpsidt=16455710
    Reference: http://www.google.com.tr/search?hl=tr&q=vana+k%C3%B6r+nokta&...
Taner Göde
Türkiye
Local time: 16:48
Works in field
Native speaker of: Native in TurkishTurkish
PRO pts in category: 32
Grading comment
çok teşekkür ederim.

Peer comments on this answer (and responses from the answerer)
agree  Mehmet Hascan
44 mins
  -> Teşekkür ederim. Eire rulez!

agree  Oktay Ardan (X)
5 hrs
  -> Çok sağolun. Teşekkür ederim.

agree  Ebru Güler
1 day 1 hr
  -> Teşekkürler. Sağolun.
Login to enter a peer comment (or grade)



Login or register (free and only takes a few minutes) to participate in this question.

You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.

KudoZ™ translation help

The KudoZ network provides a framework for translators and others to assist each other with translations or explanations of terms and short phrases.


See also:
Term search
  • All of ProZ.com
  • Term search
  • Jobs
  • Forums
  • Multiple search