GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW) | ||||
---|---|---|---|---|
|
03:03 Jun 27, 2018 |
|
English to French translations [PRO] Tech/Engineering - Engineering: Industrial / Hydraulic System | |||||||
---|---|---|---|---|---|---|---|
|
| ||||||
| Selected response from: Erzsébet Czopyk Hungary Local time: 06:52 | ||||||
Grading comment
|
Summary of answers provided | ||||
---|---|---|---|---|
5 | raccords (embouts) sans dénudage |
| ||
4 | tuyaux No-Skive - do not translate |
| ||
4 | tuyaux sans dénudage (no skive) |
|
tuyaux No-Skive - do not translate Explanation: Hose fittings have an impact on the overall efficiency and safety of a hydraulic system. The No-Skive concept was launched by Parker Hannifin some 30 years ago but continual development and the use of modern materials and production techniques have resulted in a state-of-the-art hose to fitting connector. No-Skive versus Traditional Skive Fittings • Assembly of No-Skive hose and Cr(VI)-free fittings does not require removal of the outer cover of the hose: • Premature hose failure caused by under or over skiving is avoided. • The steel wire reinforcement is protected against corrosion. • The steel wire reinforcement is mechanically protected during hose fitting assembly by the outer rubber cover. • No-Skive Cr(VI)-free fittings are designed so that the teeth of the shell bite down to the wire to give a metal-to-metal grip. Page 2, see the the image https://www.supertechnical.com/CATALOGUE/Fluid-Connectors-an... Reusable Fittings. To use a skived fitting (Figure 2-31, page 2-26), you must strip (skive) the hose to a length equal to that from a notch on a fitting to the end of the fitting. (A notch on a female portion of a fitting in Figure 2-31 indicates it to be a skived fitting.) To assemble a conductor using skived fittings—Figure 2-31 Skived fitting http://www.modernhydraulics.net/tag/skived-fittings https://www.supertechnical.com/CATALOGUE/Fluid-Connectors-an... assembly instructions for cross over fittings - Hydroscand https://www.hydroscand.com/.../Assembly instructions Cross o... If using a skive ferrule, the hose should be skived to the steel wire. https://www.ryco.com.au/technical/assembly-instructions/bite... https://www.lawnsite.com/threads/hydraulic-fittings-skive-or... Hydraulique basse pression (transport, climatisation, autres) Tuyaux No-Skive B2a-1 – B2a-11 http://www.parker.com/parkerimages/Parker.com/Divisions-2011... -------------------------------------------------- Note added at 1 hr (2018-06-27 04:22:43 GMT) -------------------------------------------------- Tuyau moyenne pression Parkrimp No-Skive - 461LT | France ph.parker.com/fr/fr/medium-pressure-parkrimp-no-skive-hose-461lt Les tuyaux Compact Elite No-Skive 461LT sont conçus pour les applications à basse température jusqu'à -50°C et une pression de travail jusqu'à 42,5 MPa. Tuyaux hydrauliques, embouts et équipements - PDF - DocPlayer.fr docplayer.fr/56225257-Tuyaux-hydrauliques-embouts-et-equipem... Nous nous efforçons de fournir des produits conçus et fabriqués localement avec un .... Les embouts No-Skive procurent un haut niveau de sécurité et sont plus .... bon que par l efficacité de son assemblage et la manière dont il a été assemblé. .... embouts Parker avec notre traitement de surface standard sans chrome 6, |
| |
Grading comment
| ||
Login to enter a peer comment (or grade) |
tuyaux sans dénudage (no skive) Explanation: "Skiving refers to removing (or shaving) part of the hydraulic hose cover and/or inner tube prior to attaching hose ends. No-skive means the hose and fittings are designed to work without this step. In other words, hose and fittings come ready to assemble. The big difference between skive and no-skive hose is in the thickness of the outer cover. The thicker cover requires a different hydraulic fitting shell due to the thickness. " http://blog.parker.com/the-advantages-of-no-skive-versus-ski... "Tuyaux hydrauliques, embouts et équipements - Parker Hannifin http://www.parker.com/.../Tuyaux hydrauliques embouts et équ... Fournir une solution simple de tuyaux hydrauliques robustes, conçus pour endurer les ...... Parkrimp No-Skive sans dénudage et ParLock avec dénudage." -------------------------------------------------- Note added at 3 hrs (2018-06-27 06:54:37 GMT) -------------------------------------------------- c'est évidemment le tuyau qu'on dénude, pas le raccord. Donc raccords pour tuyaux sans dénudage. |
| |
Login to enter a peer comment (or grade) |
raccords (embouts) sans dénudage Explanation: http://www.paul-forrer.ch/items/3050/617/9341235549/50080_E1... -------------------------------------------------- Note added at 2 heures (2018-06-27 05:30:06 GMT) -------------------------------------------------- fitting = raccord (embout) hose = tuyau (flexible) Ici, c'est le raccord de flexible -------------------------------------------------- Note added at 2 heures (2018-06-27 05:30:45 GMT) -------------------------------------------------- http://www.granddictionnaire.com/ficheOqlf.aspx?Id_Fiche=897... -------------------------------------------------- Note added at 12 heures (2018-06-27 15:36:19 GMT) -------------------------------------------------- selon mon lien, c'est l'embout sans dénudage |
| |
Login to enter a peer comment (or grade) |
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.