GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW) | ||||||
---|---|---|---|---|---|---|
|
13:24 Sep 9, 2014 |
English to Polish translations [PRO] Tech/Engineering - Manufacturing | |||||||
---|---|---|---|---|---|---|---|
|
| ||||||
| Selected response from: Frank Szmulowicz, Ph. D. United States Local time: 10:48 | ||||||
Grading comment
|
Summary of answers provided | ||||
---|---|---|---|---|
3 +1 | laminowanie (układadanie warstw tkaniny szklanej impregnowanej żywicą epoxydową) |
| ||
2 +1 | nakładanie podłoża |
|
Discussion entries: 2 | |
---|---|
nakładanie podłoża Explanation: This is a backing layer, hence my proposition MAY fit. -------------------------------------------------- Note added at 42 mins (2014-09-09 14:07:30 GMT) -------------------------------------------------- Perhaps even nakładanie powłoki. |
| |
Grading comment
| ||
Login to enter a peer comment (or grade) |
laminowanie (układadanie warstw tkaniny szklanej impregnowanej żywicą epoxydową) Explanation: Słownictwo z procesu produkcji laminatów szklano-epoksydowych Z patentu: When using a gelcoat in the manufacture of reinforced shaped articles, it is extremely important to apply the glass and catalysed resin to the curing gelcoat within the correct period of the gelcoat's cure. The process of applying glass and catalysed resin to a gelcoat layer on/in a mould is known within the industry as "backing up". If this backing up is commenced too early, before the gelcoat has cured sufficiently, the resin can attack the gelcoat, causing it to wrinkle. If, on the other hand, backing up is delayed for so long that the gelcoat becomes too fully cured, the bond between the gelcoat layer and the rest of the reinforced article may be too weak. http://www.google.com/patents/EP2373718A1?cl=en Przykład polski: Przerwa między położeniem żelkotu (przy żelkocie ręcznym jest to druga warstwa żelkotu), a rozpoczęciem laminowania powinna być nie dłuższa niż 12 godzin, optymalnie jeżeli rozpoczynamy laminowanie po 2-3 godzinach od zakończenia nakładania żelkotu. W momencie rozpoczęcia laminowania żelkot powinien być już w tzw. „stanie lepkosuchym” - żelkot się klei, ale już nie brudzi. Taki stan utwardzenia powinien wystąpić maksymalnie 90-100 minutach po zakończeniu natrysku. http://www.baltazarkompozyty.pl/index.php?option=com_content... Z angielskiego: back up - provide support = wspierać, wzmacniać Reference: http://www.google.com/patents/EP2373718A1?cl=en |
| |
Login to enter a peer comment (or grade) |
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.