set screw

Serbian translation: zavrtanj/vijak za podešavanje/osiguranje/stezanje

GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW)

English term or phrase:	set screw
Serbian translation:	zavrtanj/vijak za podešavanje/osiguranje/stezanje
Entered by:	Goran Tasic

02:13 Sep 21, 2011

English to Serbian translations [PRO]
Tech/Engineering - Engineering (general)

English term or phrase: set screw

цитат из Википедије:

A set screw is a type of screw generally used to secure an object within or against another object. The most common examples are securing a pulley or gear to a shaft. Set screws are most often headless (also called blind), meaning that the screw is fully threaded and has no head projecting past the major diameter of the screw thread. A blind set screw (known in the UK as a grub screw, quite possibly from its figurative resemblance to a soil-dwelling grub) is almost always driven with an internal-wrenching drive, such as a hex socket (Allen), star (Torx), square socket (Robertson), or slot. The set screw passes through a threaded hole in the outer object and is tightened against the inner object to prevent it from moving relative to the outer object. It exerts compressional or clamping force through the bottom tip that projects through the hole.

Страница у Википедији:
http://en.wikipedia.org/wiki/Set_screw

Dejan Škrebić KudoZ activity Questions: 98 (none open) (4 closed without grading) Answers: 455 Bosnia and Herzegovina
Local time: 11:30

zavrtanj za podešavanje/osiguranje/stezanje

Explanation:
ili uvrtni zavrtanj, čak što više može se i nazvati osigurač. To je zavrtanj sa navojem po celoj dužini tela, obično bez glave. Ovim zavrtnjem se nešto podešava ili doteruje, dovodi u neki položaj, osigurava. Može da služi i kao osigurač za privrčšćivanje nekog dugmeta/ručice ili zupčanika na osovini. To je mali zavrtanj bez glave sa upuštenim šestougaonim otvorom ili žljebom na jednom kraju i jedan oblik vrha na drugom kraju. Jedan od takvih je i mali zavrtanj za podešavanje smeše dovoda vazduha na karburatoru.

Selected response from:

Goran Tasic
Serbia
Local time: 11:30

Grading comment

Selected automatically based on peer agreement.
4 KudoZ points were awarded for this answer

Summary of answers provided

5 +2

zavrtanj za podešavanje/osiguranje/stezanje

Goran Tasic

pritisni vijak / vijak sa glavom /stezni vijak / položajni vijak

Mira Stepanovic

Discussion entries: 1

Answers

3 hrs confidence:

peer agreement (net): +2

zavrtanj za podešavanje/osiguranje/stezanje

Goran Tasic
Serbia
Local time: 11:30
Specializes in field
Native speaker of:

Serbian
PRO pts in category: 28

Grading comment

Selected automatically based on peer agreement.

4 hrs confidence:

pritisni vijak / vijak sa glavom /stezni vijak / položajni vijak

Explanation:
set screw - pritisni vijak,
set screw - vijak sa glavom, stezni vijak, položajni vijak
ref. Rečnik mašinske tehnike, J. Miličević

http://en.wikipedia.org/wiki/Set_screw
A set screw is a type of screw generally used to secure an object within or against another object. The most common examples are securing a pulley or gear to a shaft. Set screws are most often headless (also called blind), meaning that the screw is fully threaded and has no head projecting past the major diameter of the screw thread. A blind set screw (known in the UK as a grub screw, quite possibly from its figurative resemblance to a soil-dwelling grub) is almost always driven with an internal wrenching drive, such as a hex socket (Allen), star (Torx), square socket (Robertson), or slot. The set screw passes through a threaded hole in the outer object and is tightened against the inner object to prevent it from moving relative to the outer object. It exerts compressional or clamping force through the bottom tip that projects through the hole.

To znači da je generalno sa glavom, (v. sliku "Example of set screws" na navedenoj stranici Vikipedije) a kada je bez glave zove se blind set screw ili grub screw

Grub screw (blind set screw) - bezglavi vijak, navojna čivija, ref. mašinske tehnike, J. Miličević

Pored toga, ovde je korektniji izraz "vijak" (screw) jer "zavrtanj" (bolt) ide sa navrtkom i podloškom što očigledno nije slučaj kod ovog spojnog elementa.

--------------------------------------------------
Note added at 4 hrs (2011-09-21 06:59:28 GMT)
--------------------------------------------------

Još samo da dodam: koji ćete od ponuđenih naziva za ovo spojno sredstvo izabrati zavisi od njegove funkcije u samom sklopu u konkretnom slučaju.

--------------------------------------------------
Note added at 4 hrs (2011-09-21 07:13:05 GMT)
--------------------------------------------------

Molim vas pogledajte i sliku "Isometric projection of a grub screw with a hex socket head." na navedenoj stranici Vikipedije.

--------------------------------------------------
Note added at 1 day15 hrs (2011-09-22 18:04:01 GMT)
--------------------------------------------------

ref. Rečnik mašinske tehnike englesko-srpski, srpsko-engleski, J. Miličević

--------------------------------------------------
Note added at 2 days12 hrs (2011-09-23 14:17:08 GMT)
--------------------------------------------------

http://www.proz.com/kudoz/4528051

Mira Stepanovic
Serbia
Local time: 11:30
Specializes in field
Native speaker of:

Serbian,

Serbo-Croat
PRO pts in category: 64

Login or register (free and only takes a few minutes) to participate in this question.

You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.

Return to KudoZ list

KudoZ™ translation help

The KudoZ network provides a framework for translators and others to assist each other with translations or explanations of terms and short phrases.

See also:

ProZ.com term search

Search millions of term translations