09:00 Dec 12, 2016 |
English to Polish translations [PRO] Tech/Engineering - Electronics / Elect Eng | |||||||
---|---|---|---|---|---|---|---|
|
|
Summary of answers provided | ||||
---|---|---|---|---|
2 | wyjście (tu: stałoprądowe) do obwodu sterującego |
|
Summary of reference entries provided | |||
---|---|---|---|
pilot duty relay |
|
Discussion entries: 6 | |
---|---|
pilot duty wyjście (tu: stałoprądowe) do obwodu sterującego Explanation: Basic PLC 32 I/O Circuits DIFFERENT TYPES OF I/O CIRCUITS 1. Pilot Duty Outputs Outputs of this type typically are used to drive high-current electromagnetic loads such as solenoids, relays, valves, and motor starters. These loads are highly inductive and exhibit a large inrush current. Pilot duty outputs should be capable of withstanding an inrush current of 10 times the rated load for a short period of time without failure. http://www.slideshare.net/legendsundar/basic-plc-32747883 Styki normalnie otwarte są to takie styki, które w stanie beznapięciowym stycznika są otwarte, a styki normalnie zamknięte to takie styki, które w stanie beznapięciowym stycznika są zamknięte. Gdy przez cewkę stycznika płynie prąd styki główne zamykają się, zaś styki normalnie otwarte zamykają się, a normalnie zamknięte otwierają się. Otwieranie styków głównych następuje po przerwaniu obwodu zasilającego elektromagnes, czyli obwodu sterującego, wskutek działania ciężaru zwory i siły sprężyny http://wim.utp.edu.pl/dok/Instrukcje-wyklady/ele_13.pdf |
| |
Login to enter a peer comment (or grade) |
1 hr |
Reference: pilot duty relay Reference information: A relay used for switching loads such as another relay or solenoid valve coils. The pilot duty relay contacts are located in a second control circuit. Pilot duty relays are rated in volt-amperes (VA). - http://www.engineering-dictionary.org/Dictionary-of-Technica... ---- A pilot duty rating is a contact rating intended for contacts that control the coil of another relay or contactor. These ratings are applicable when controlling loads like relay coils, contactor coils, solenoids, and other similar inductive loads - http://www.macromatic.com/blog/relays/what-are-pilot-duty-ra... ------- A relay can be assigned a pilot duty rating when it's used for switching loads on another relay or solenoid valve coils. It can be a direct current (DC) rating or an alternating current (AC) rating as shown in the table at the bottom of this post - https://na.industrial.panasonic.com/blog/what-pilot-duty-rat... |
| |
Login to enter a peer comment (or grade) |
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.