CAN-Bus
English translation: CAN bus (Controller Area Network)
| GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW) | ||||||
|---|---|---|---|---|---|---|
|
| 09:57 May 1, 2001 |
| German to English translations [PRO] Tech/Engineering | |||||||
|---|---|---|---|---|---|---|---|
|
| ||||||
|  Selected response from: Ulrike Lieder (X) Local time: 20:50 | ||||||
Grading comment
| |||||||
| Summary of answers provided | ||||
|---|---|---|---|---|
| na | CAN bus |
| ||
| na | Control area network bus |
|
Answers
7 mins
CAN bus Explanation: Stays the same. CAN stands for Controller Area Network. Same references: CAN Description The Controller Area Network (CAN) specification defines the Data Link Layer, ISO 11898 defines the Physical Layer. The CAN interface is an 2-wire asynchronous transmission scheme controlled by start and stop bits at the beginning and end of each character. This interface is used, employing serial binary interchange. Information is passed from transmitters to receivers in a data frame. The data frame is composed of an Arbitration field, Control field, Data field, CRC field, ACK field. The frame begins with a ‘Start of frame’, and ends with an ‘End of frame’ space. The data field may be from 0 to 8 bits. The frame check sequence is derived from a Cyclic Redundancy Code (CRC); the coefficients are generated modulo-2: X15 + X14 + X10 + X8 + X7 + X4 + X3 + 1 For additional information refer to: CAN Specification; Version 2.0, or ISO 11898/11519 www.interfacebus.com/Design_Connector_CAN.html CAN bus specification 2.0 CiA (CAN in Automation) CAN bus specification 2.0, Go to the top of this page. ... www.semiconductors.philips.com/can/aboutus/ CAN bus ... CAN bus. Virtual Real Time De-centralised Control and Monitoring. CAN bus is the ideal choice for Digilog’s revolutionary Distributed Control System due to its ... www.digilog.co.uk/html/can_bus.html HTH. |
| ||||||||||
10 mins
| |||||||||||
