Vorzüge
English translation: first draws
| GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW) | ||||||
|---|---|---|---|---|---|---|
|
| 02:50 Dec 3, 2003 |
| German to English translations [PRO] Tech/Engineering | |||||||
|---|---|---|---|---|---|---|---|
|
| ||||||
|  Selected response from: Kim Metzger Mexico Local time: 02:26 | ||||||
Grading comment
| |||||||
| Summary of answers provided | ||||
|---|---|---|---|---|
| 4 | up-grades |
| ||
| 4 | pre-selection |
| ||
| 3 | first draws |
|
Answers
13 mins confidence: 
up-grades Explanation: perhaps? |
| |
| Login to enter a peer comment (or grade) | ||
1 hr confidence:
| Vorzüge first draws Explanation: A Blechronde is a circular sheet-metal blank used for cupping or deep drawing, for example (Tiefziehen, Napfziehen). Ernst gives first draw for Vorzug. From what I understand this is what you get after the blank has gone through the initial phase of deep drawing. Deep drawing - Characterized by the production of a parallel-wall cup from a flat blank of sheet metal. The blank may be circular, rectangular, or a more complex shape. The blank is drawn into the die cavity by the action of a punch. Deformation is restricted to the flange areas of the blank. No deformation occurs under the bottom of the punch-the area of the blank that was originally within the die opening. As the punch forms the cup, the amount of material in the flange decreases. Also called cup drawing or radial drawing. http://nsmwww.eng.ohio-state.edu/Stamping_Glossary/html/d.ht... Drawing Metal - The forming of sheet metal or other material by pressing it into a die while at the same time retarding movement of the metal into the die by mechanical holding, as with draw rings. http://www.iam751.org/contract/glossary/GLOSSARY OF TERMS AN... The most important factor to remember when performing draw reductions is that all of the material necessary to make the final part shape must be present in the first draw. Figure 3 is a reduction chart for the first, second, and third draws with draw-quality steel. Reduction percentages are based on metal thickness and type. http://www.thefabricator.com/xp/Fabricator/Articles/Stamping... Reference: http://www.thefabricator.com/xp/Fabricator/Articles/Stamping... W�rterbuch der Industriellen Technik - Ernst |
| |
Grading comment
| ||
| Login to enter a peer comment (or grade) | ||
2 hrs confidence:
| Vorzüge pre-selection Explanation: my experienced is more empirical, from stocking area, and the various replaceable parts, which come into question depending upon the demographical requirement of the customer group. Example: a high-tech surgical bed, with various replaceable parts. |
| |
| Login to enter a peer comment (or grade) | ||
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.
KudoZ™ translation help
The KudoZ network provides a framework for translators and others to assist each other with translations or explanations of terms and short phrases.
See also:
Search millions of term translations