This site uses cookies.
Some of these cookies are essential to the operation of the site,
while others help to improve your experience by providing insights into how the site is being used.
For more information, please see the ProZ.com privacy policy.
This person has a SecurePRO™ card. Because this person is not a ProZ.com Plus subscriber, to view his or her SecurePRO™ card you must be a ProZ.com Business member or Plus subscriber.
Affiliations
This person is not affiliated with any business or Blue Board record at ProZ.com.
English to Arabic: Micro-Surfacing General field: Tech/Engineering Detailed field: Construction / Civil Engineering
Source text - English OVERVIEW
This chapter provides an overview of the micro-surfacing products presently used in California, including materials and specifications, mix design, project selection, details regarding construction, a troubleshooting guide to assist the Engineer if problems arise during the placement of these mixtures, and a list of suggested field considerations when placing a micro-surfacing.
6.1.1 General Description
Micro-surfacing is a mixture of asphalt emulsion, graded aggregates, mineral filler, water and other additives. The mixture is made and placed on a continuous basis using a travel paver (Slurry Surfacing Machine). The travel paver meters the mix components in a predetermined order into a pug mill. The typical mixing order is aggregate followed by cement, water, the additive and the emulsion. Figure 6-1 illustrates the process of slurry surfacing.
Translation - Arabic مقدمة :
هذا الفصل يعطي نظرة على منتجات التعبئة الرقيقة المستخدمة حالياً في ولاية كاليفورنيا، ويشمل المواد والمواصفات، وتصميم الخليط واختيار المشروع، وتفاصيل متعلقة بالإنشاء، ودليل تحديد موطن الخلل وتصليحه وذلك لمساعدة المهندس إذا ما ظهرت مشاكل أثناء وضع هذه المخاليط، بالإضافة إلى قائمة بالمتطلبات الحقلية المقترحة عندما يتم فرش التعبئة الرقيقة.
1.1.6. الوصف العام (General Description):
التعبئة الرقيقة عبارة عن خليط مكون من مستحلبات إسفلتية، وركام متدرج، ومادة مالئة، وماء ومضافات أخري. يتم تصنيع الخليط ويفرش بصورة مستمرة باستخدام الفارشة المتحركة (آلة الملاط السطحي). الفارشة المتحركة تقوم بوزن مكونات الخليط بترتيب محدد مسبقاً إلى آلة الخلط. الترتيب النمطي للخلط يبدأ بوزن الركام ويكون متبوع بالإسمنت، والماء، والمضافات ومن تم المستحلب. شكل (6-1) يوضح النسق النمطي لعملية السطح الرقيق، جدول (6-1) يوضح مكونات الة التعبئة الرقيقة.
More
Less
Experience
Years of experience: 4. Registered at ProZ.com: Nov 2020.