Glossary entry (derived from question below)
German term or phrase:
Arbeitsplus
English translation:
operating power (+)
Added to glossary by
Magdalena Kowalska
Oct 13, 2015 07:07
8 yrs ago
German term
Arbeitsplus
German to English
Tech/Engineering
Automotive / Cars & Trucks
Hybridantriebssysteme, Diagnosetrainer
Arbeitsplus and Arbeitsplusleitung:
"Die Messungen zeigen, dass in der Arbeitsplusleitung ein unzulässig hoher Spannungsfall auftritt."
"Arbeitsplus für das Steuergerät, vom Relais K1 geschaltet"
"Die Messungen zeigen, dass in der Arbeitsplusleitung ein unzulässig hoher Spannungsfall auftritt."
"Arbeitsplus für das Steuergerät, vom Relais K1 geschaltet"
Proposed translations
(English)
4 +2 | operating power (+) | Richard Stephen |
3 -1 | increased workload, extra workload | Erzsébet Czopyk |
Proposed translations
+2
26 mins
Selected
operating power (+)
This is the way I would handle it. "Abreitsplus" is not even very widespread in German usage. What they're saying is its the operating line, which is connected to the positive terminal on the battery in most all cars (which have a negative ground system - which is nearly all).
4 KudoZ points awarded for this answer.
-1
14 mins
increased workload, extra workload
The measurements show that during the extra workload an impermissibly high voltage event occurs (may occur).
Electrical Overstress EOS - Cypress
www.cypress.com/file/97816/download
high currents experienced during the EOS event can generate very localized ... Latch-up occurs when the device reaches a threshold (current and voltage) that.
Keywords: treshold, extra workload, critical load
--------------------------------------------------
Note added at 21 mins (2015-10-13 07:28:51 GMT)
--------------------------------------------------
increased workload
4.28 - TE & BE - Electrical Engg. - University of Mumbai
archive.mu.ac.in/.../4.28%20-%20TE%20&%20BE%20-...
workload of learner in sem-VII is equivalent to 6 hrs/wk .... Frequency relays, under/over voltage relays, DC relays, All or nothing relays. ...... Begamudre R.D. “Extra High Voltage AC Transmission Engineering”, New Age.
field test procedure for protective relays - Bureau of ...
www.usbr.gov/.../3-8 Field Test Procedure%...
Time-Overcurrent and Time-Overvoltage Relays . .... for anticipated increased unit output or line loading. ... isting workloads and available manpower with ..... Master Element is the initiating device, such as a control switch, voltage relay, or.
Over current relay
A digital overcurrent relay is a type of protective relay which operates when the load current exceeds a pickup value. The ANSI device number is 50 for an instantaneous over current (IOC) and 51 for a time over current (TOC). In a typical application the over current relay is connected to a current transformer and calibrated to operate at or above a specific current level. When the relay operates, one or more contacts will operate and energize to trip (open) a circuit breaker.
https://en.wikipedia.org/wiki/Protective_relay#Over_current_...
Electrical Overstress EOS - Cypress
www.cypress.com/file/97816/download
high currents experienced during the EOS event can generate very localized ... Latch-up occurs when the device reaches a threshold (current and voltage) that.
Keywords: treshold, extra workload, critical load
--------------------------------------------------
Note added at 21 mins (2015-10-13 07:28:51 GMT)
--------------------------------------------------
increased workload
4.28 - TE & BE - Electrical Engg. - University of Mumbai
archive.mu.ac.in/.../4.28%20-%20TE%20&%20BE%20-...
workload of learner in sem-VII is equivalent to 6 hrs/wk .... Frequency relays, under/over voltage relays, DC relays, All or nothing relays. ...... Begamudre R.D. “Extra High Voltage AC Transmission Engineering”, New Age.
field test procedure for protective relays - Bureau of ...
www.usbr.gov/.../3-8 Field Test Procedure%...
Time-Overcurrent and Time-Overvoltage Relays . .... for anticipated increased unit output or line loading. ... isting workloads and available manpower with ..... Master Element is the initiating device, such as a control switch, voltage relay, or.
Over current relay
A digital overcurrent relay is a type of protective relay which operates when the load current exceeds a pickup value. The ANSI device number is 50 for an instantaneous over current (IOC) and 51 for a time over current (TOC). In a typical application the over current relay is connected to a current transformer and calibrated to operate at or above a specific current level. When the relay operates, one or more contacts will operate and energize to trip (open) a circuit breaker.
https://en.wikipedia.org/wiki/Protective_relay#Over_current_...
Peer comment(s):
disagree |
Richard Stephen
: Sorry, but your answer is not even close to the intended meaning and your references do not describe the situation at hand in the question.
16 mins
|
I am sorry, it is a suggestion which can accepted or refused. I tried to interpret Arbeitsplus as I could.
|
Something went wrong...