Too high open frame pads and too low pinch frame pads

09:06 Jun 16, 2005 

08:48 Jun 16, 2005 

Examples of what is seen when looking through a poorly aligned telescope are shown below in the column headed �Image Quality�. The cause of the poor alignment is shown alongside in the column headed �Telescope position� and the action to achieve precise alignment shown alongside that in the
column headed �Action�.
The corrective actions outlined below should be followed for each individual telescope.
IMAGE
QUALITY
TELESCOPE
POSITION
ACTION
Too high Open frame pads
Too low Pinch frame pads
Too far left Slide telescope to the right in the direction of the
Shadow
Too far right slide telescope to the left in the direction of the shadow
4 - YOUR WORKING ANGLE
Correctly fitted loupes can help reduce back and neck pain. Spend a few moments ensuring your
loupes are at the optimal angle to suit you.
Adjust the angle and height of your loupes by adjusting the hinge (Figure 7).
5 - HOW TO FIT AND REMOVE LOUPES FROM THE FRAME
Luxtec loupes allow you to easily fit or remove them from the frame. This allows you to switch
between loupes of different magnifications without having to purchase an additional frame. To fit
Luxtec loupes to the hinge, hold the loupe PD bar and push the loupes onto the hinge pins through

08:40 Jun 16, 2005