Glossary entry (derived from question below)
Russian term or phrase:
стыковка швов
English translation:
joint coupling
Added to glossary by
Taganova
Nov 26, 2013 08:12
10 yrs ago
Russian term
стыковка швов
Russian to English
Tech/Engineering
Construction / Civil Engineering
в раме двери отсутствует стыковка швов
Thank you in advance!
Thank you in advance!
Proposed translations
(English)
| 3 +3 | joint coupling |
Igor Moshkin
|
| 4 | the door frame miter joints have opened |
Frank Szmulowicz, Ph. D.
|
Proposed translations
+3
9 mins
Igor Moshkin
Russian Federation
Russian Federation
Native in Russian
Works in field
Russian Federation
Feedback and support of any kind
Native in: Russian 
Works in: English to Russian, Russian to English
Related KudoZ points
:
15
Selected
joint coupling
---
--------------------------------------------------
Note added at 39 mins (2013-11-26 08:51:54 GMT)
--------------------------------------------------
Perhaps they want to mention poor connection of the joints.
--------------------------------------------------
Note added at 39 mins (2013-11-26 08:51:54 GMT)
--------------------------------------------------
Perhaps they want to mention poor connection of the joints.
Reference:
Note from asker:
| Frankly I can't understand the process or fact here. Is it a kind of connecting two joints? Thank you in advance. |
4 KudoZ points awarded for this answer.
Comment: "Many thanks!"
17 hrs
Frank Szmulowicz, Ph. D.
United States
United States
Native in English
Works in field
United States
On time, on target, on budget.
Native in: English , Polish
Works in: Polish to English, English to Polish, Russian to Polish, and 1 more.
Related KudoZ points
:
190
the door frame miter joints have opened
This is woodworking lingo.
the door frame miters have opened
Example:
If there's a slight gap between the molding and the wall, don’t press the trim tight to the wall and nail it; the miter joint might open up
the door frame miters have opened
Example:
If there's a slight gap between the molding and the wall, don’t press the trim tight to the wall and nail it; the miter joint might open up
Example sentence:
By removing some material from the back edge of the mitered face of one or both mating pieces, you may be able to close the OPEN JOINT on the face of the joint (
To prevent MITERS from opening, drive a 4d finishing nail through the edge of the head and side casings about 3/4 inch from the outside corner
Reference:
http://www.homeimprovementweb.com/information/how-to/door-casing-installation.htm
http://www.familyhandyman.com/carpentry/trim-carpentry/tips-for-tight-miters-and-miter-cuts/view-all
Something went wrong...