Glossary entry (derived from question below)
Polish term or phrase:
Programowanie ciągów konturowych.
English translation:
programming contour strings
Added to glossary by
Frank Szmulowicz, Ph. D.
Apr 14, 2014 19:17
10 yrs ago
Polish term
Programowanie ciągów konturowych.
Polish to English
Tech/Engineering
Engineering: Industrial
Ponownie, termin z opisu szkolenia dla obrabiarek CNC:
Programowanie ciągów konturowych.
Jako jedno z zagadnień poruszanych na kursie...
Any idea?
Dzięki,
Andrzej
Programowanie ciągów konturowych.
Jako jedno z zagadnień poruszanych na kursie...
Any idea?
Dzięki,
Andrzej
Proposed translations
(English)
3 | programming contour strings |
Frank Szmulowicz, Ph. D.
![]() |
Change log
Apr 22, 2014 22:56: Frank Szmulowicz, Ph. D. Created KOG entry
Proposed translations
24 mins
Selected
programming contour strings
CNC term
--------------------------------------------------
Note added at 6 hrs (2014-04-15 01:41:00 GMT)
--------------------------------------------------
Programming contour strings in subprograms
http://www.mts-cnc.us/c_overview.html
ccccccccccccccccccccccccccccccccccccccccccccccccccc
Segment Contour Programming (Contour Strings)
When programming is done directly from design drawings which have not been dimensioned according to NC requirements, the task will be much facilitated by the possibility of entering the geometry data of a sequence of chained contour segments, so-called "contour strings". Instead of entering the co-ordinates of a corner point or circle centre (parameters according to German Standard DIN 66025) the contour string commands G71 (straight line), G72 (circular arc, clockwise) and G73 (circular arc, counterclockwise) allow direct input of further design data such as angles, lengths, tangential tranistions etc. This relieves the user from the chore of intermediate calculations.
http://www.mts-cnc.com/espanol/sd5e.htm#7.2
ccccccccccccccccccccccccccccccccccccccccccccc
The system also should allow of programming contour strings, tools tips and ...
file:///C:/Documents%20and%20Settings/orzyszpon/My%20Documents/Downloads/USK-PP-04R%20BAB%20XII%20SPEK.%20TEKNIS.pdf
--------------------------------------------------
Note added at 6 hrs (2014-04-15 01:41:00 GMT)
--------------------------------------------------
Programming contour strings in subprograms
http://www.mts-cnc.us/c_overview.html
ccccccccccccccccccccccccccccccccccccccccccccccccccc
Segment Contour Programming (Contour Strings)
When programming is done directly from design drawings which have not been dimensioned according to NC requirements, the task will be much facilitated by the possibility of entering the geometry data of a sequence of chained contour segments, so-called "contour strings". Instead of entering the co-ordinates of a corner point or circle centre (parameters according to German Standard DIN 66025) the contour string commands G71 (straight line), G72 (circular arc, clockwise) and G73 (circular arc, counterclockwise) allow direct input of further design data such as angles, lengths, tangential tranistions etc. This relieves the user from the chore of intermediate calculations.
http://www.mts-cnc.com/espanol/sd5e.htm#7.2
ccccccccccccccccccccccccccccccccccccccccccccc
The system also should allow of programming contour strings, tools tips and ...
file:///C:/Documents%20and%20Settings/orzyszpon/My%20Documents/Downloads/USK-PP-04R%20BAB%20XII%20SPEK.%20TEKNIS.pdf
4 KudoZ points awarded for this answer.
Comment: "Dziękuję!"
Something went wrong...