GLOSSARY ENTRY (DERIVED FROM QUESTION BELOW) | ||||||
---|---|---|---|---|---|---|
|
14:35 Mar 5, 2007 |
Dutch to English translations [PRO] Medical - Medical: Dentistry | |||||||
---|---|---|---|---|---|---|---|
|
| ||||||
| Selected response from: Kate Hudson (X) Netherlands Local time: 06:51 | ||||||
Grading comment
|
Summary of answers provided | ||||
---|---|---|---|---|
4 +1 | stud |
| ||
3 -1 | round ball anchor |
|
stud Explanation: A new overdenture attachment system that allows the user to replace both the male ... Zest Anchor Advanced Generation (ZAAG) is an improvement over the ... www.preat.com/overdenture.htm - 17k - Cached - Similar pages [PDF] Overdenture Procedures Direct Stud Type File Format: PDF/Adobe Acrobat procedures continued next page. Overdenture Procedures. Direct Stud Type ... Place spacers first and then the Uni Anchor females over brass analogs. (J) ... www.attachments.com/attachmentpropdf/ 42_43_uni_anchor_od_pro.pdf -------------------------------------------------- Note added at 36 mins (2007-03-05 15:12:07 GMT) -------------------------------------------------- stud attachment is probably the best translation The rigid type Dalbo Stud attachment generated the smallest maximum effective stress in ... Over the past two decades, implant supported overdentures have ... www.blackwell-synergy.com/links/doi/10.1111/j.1365-2842.200... |
| |
Login to enter a peer comment (or grade) |
round ball anchor Explanation: http://216.239.59.104/search?q=cache:0pFdiUziESYJ:www.bsl.nl... drukknopverankering ronde metalen bolletjes die op een tandwortel of implantaat zijn bevestigd http://216.239.59.104/search?q=cache:uAawVbaP034J:www.implan... round ball anchor? http://216.239.59.104/search?q=cache:PZRTtCJxji0J:www.porcel... 1. Fill the bath with water at the selected temperature until the highest jet is fully covered. 2- Get into the water and gently press the starter button ON / OFF. (FIG. 2). 3- Adjust the nozzle as shown in FIG. 3 to direct the jet at the targeted part of the body. 4- Turning the jet nozzle to the right decreases the water flow whereas turning it to the left raises the flow. (FIG. 3). 5- Select the desired type of hydromassage: feet, hips or back, using the 3, 4 and 5 buttons, as per FIG. 1 Dutch 1- Het bad laten vollopen met water op de gewenste temperatuur totdat de hoogstgelegen jet helemaal onder water staat. 2- In het bad stappen en zachtjes de drukknop AAN indrukken ON/OFF. (FIG. 1). 3- Om de waterstraal op het gewenste deel van het lichaam te richten, de spuitmond verstellen zoals in FIG.2 is aangegeven. 4- Om het stroomvolume van het water aan te passen, de spuitmond naar rechts draaien om deze te verlagen en naar links om deze te verhogen (FIG. 3). 5- Selecteer het gewenste hydromassagetype: voeten, heupen of rug door middel van de knoppen 3, 4 en 5 van FIG. On the same site you will find the word “verankering” with the English equivalent, however the print is very small! AND Before proceeding with the installation of the column, insert a 1⁄2” female connection point into the wall to accommodate part 1, which will, in turn, accommodate the column (fig. 3). Place the column against the wall and, using a level, make sure that it is straight. Mark the point at which you are going to attach the upper column support to the wall. Remove the column and, using a drill, make the corresponding hole (zoom 1).Screw the upper support to the wall and then attach the column to both the support and part 1 using the nuts supplied. Vor der Montage der Säule ist ein in die Wand eingebautes 1⁄2“ Innengewinde zu installieren, um Teil 1 in dieses zu schrauben und danach die Säule an Teil 1 zu schrauben (Fig. 3). Senkrechte Stellung der Säule mit einer Wasserwaage justieren und an der Wand die Stellung der oberen Halterung markieren, Säule entfernen, Bohrung vornehmen und die obere Halterung für die Verankerung der Säule festschrauben (Zoom 1). Säule unter Verschraubung der beweglichen Muttern an die obere Halterung und an Teil 1 montieren. Alvorens over te gaan tot de installatie van de kolom, dient een in de wand ingebouwd vrouwtje 1/2 te worden aangebracht om er onderdeel 1 op vast te schroeven. Op onderdeel 1 wordt daarna de kolom geschroefd, (fig. 3). Met een waterpas de verticale stand van de kolom bijstellen en de positie van de bovenste bevestigingssteun op de wand markeren. De kolom opzij zetten, een gat boren en de bovenste bevestigingssteun vastschroeven ter verankering van de kolom, (zoom 1). De kolom aan de bovenste bevestigingssteun en aan onderdeel 1 vastmaken door de beweegbare moeren vast te schroeven. INSTALACIÓN DE LA COLUMNA / COLUMN INSTALLATION / INSTALLATION DE LA COLONNE / INSTALLAZIONE DELLA COLONNA / INSTALAÇÃO DA COLUNA vvvva/ MONTAGE DER SÄULE / AANSLUITING VAN DE DOUCHEKOLOM verankering van de colom = makevera -------------------------------------------------- Note added at 31 mins (2007-03-05 15:07:18 GMT) -------------------------------------------------- p.s. I don't do Dutch, at all! -------------------------------------------------- Note added at 45 mins (2007-03-05 15:21:15 GMT) -------------------------------------------------- And what about this: Implant Main PageIt is the ball attachment of choice for all implants. ... Retention is derived from two or four CEKA REVAX attachments with adjustable, ... www.preat.com/implants.htm - 20k - Cached - Similar pages Overdenture Stud ListingTraditional Ceka Axial (M3). Preci-Ball · Preci Ball Castable Male Instructions. The Preci Ball 22 is a resilient (full rotation) stud attachment. ... www.preat.com/overdenture.htm - 17k - Cached - Similar pages BEGO Implant Systems – Frequently Asked Questions: ProsthodonticsDoes the Sub-Tec Ball attachment fit on the transmucosal connecting part? ... bonding (Nimetec Cem/3M Espe, Attachment bond/Heraeus Kulzer, CK Cide/CEKA) ... www.bego-implantology.com/html/e/faq/faqprot.shtml - 20k - Cached - Similar pages |
| |
Login to enter a peer comment (or grade) |
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.