Glossary entry (derived from question below)
Dutch term or phrase:
grenskracht
English translation:
limit force
Added to glossary by
Chris Walker
Oct 28, 2009 18:25
14 yrs ago
Dutch term
France
Your thoughts exactly.
Native in: French 
, English
Works in: French to English, English to French, Dutch to French, and 3 more.
grenskracht
Dutch to English
Tech/Engineering
Construction / Civil Engineering
Context: steel constructions spec
Related terms: Grenskracht van bouten, Grensstuikkracht, Grensafschuifkracht per afschuifvlak, Grenstrekkracht
Is this "threshold force"? google doesn't give me conclusive results. Thanks for confirming/correcting!
Related terms: Grenskracht van bouten, Grensstuikkracht, Grensafschuifkracht per afschuifvlak, Grenstrekkracht
Is this "threshold force"? google doesn't give me conclusive results. Thanks for confirming/correcting!
Proposed translations
(English)
| 3 | limit force |
Textpertise
|
| 3 | threshold strength |
Saskia Steur (X)
|
Proposed translations
1 hr
Textpertise
United Kingdom
United Kingdom
Native in English
United Kingdom
Highest WWA rating in Europe for NL-EN
Native in: English 
Works in: Dutch to English, Hebrew to English
Related KudoZ points
:
65
Selected
limit force
Limit force is a term often used in steel construction of various parameters. Here is the result of a google search
A closed-form analysis of perimeter member behavior in a steel ...
Similarly, the proportional imit force, Pp,b, is equal to. (4). Pp,b=σpAb=kp,θσp,20Ab. ..... [7] AISC. steel construction manual, thirteenth edition. ...
linkinghub.elsevier.com/retrieve/pii/S0141029608001636 - Similar
by SE Quiel - 2008 - Related articles
A ductility model for steel connections - Elsevier
Numbering all components according to increasing limit force FCi, ..... to enable the safe utilisation of partial-resistant joints in steel construction, ...
linkinghub.elsevier.com/retrieve/pii/S0143974X00000092 - Similar
by L Simoes da Silva - 2001 - Cited by 23 - Related articles
Show more results from linkinghub.elsevier.com
Bridging means for joint gap - Patent 5964069
... joint construction is guided out of said joint gap when a limit force .... Anchoring of said expansion joint construction 5, said safety means 14 and said ... 3) are introduced in said steel frame S of said safety box 14 for giving ...
www.freepatentsonline.com/5964069.html - Similar
by E Schmidt - 1999 - Cited by 1 - Related articles - All 2 versions
# [PDF]
STAHLBAU-BREVIER
File Format: PDF/Adobe Acrobat - Quick View
STEEL CONSTRUCTION BREVIARY www.stahlbau-brevier.de .... BAR page 1/21-1/22: Ultimate limit force of tensile and initial stress HV- and ...
www.stahlbau-brevier.de/musterseiten/STAB_content_overview.... - Similar
# [PDF]
Utilisation of the method of stress limit for designing the motion ...
File Format: PDF/Adobe Acrobat - View as HTML
By Eq. (42), the size of the limit force, is set where β = 1.3 is the factor of the tangential .... the American Institute of Steel Construction<u/> (steel ...
journals.uzpi.cz/uniqueFiles/00886.pdf - Similar
by D Herák - Related articles - All 5 versions
#
A closed-form analysis of perimeter member behavior in a steel ...
Similarly, the proportional imit force, Pp,b, is equal to. (4). Pp,b=σpAb=kp,θσp,20Ab. ..... [7] AISC. steel construction manual, thirteenth edition. ...
linkinghub.elsevier.com/retrieve/pii/S0141029608001636 - Similar
by SE Quiel - 2008 - Related articles
A ductility model for steel connections - Elsevier
Numbering all components according to increasing limit force FCi, ..... to enable the safe utilisation of partial-resistant joints in steel construction, ...
linkinghub.elsevier.com/retrieve/pii/S0143974X00000092 - Similar
by L Simoes da Silva - 2001 - Cited by 23 - Related articles
Show more results from linkinghub.elsevier.com
Bridging means for joint gap - Patent 5964069
... joint construction is guided out of said joint gap when a limit force .... Anchoring of said expansion joint construction 5, said safety means 14 and said ... 3) are introduced in said steel frame S of said safety box 14 for giving ...
www.freepatentsonline.com/5964069.html - Similar
by E Schmidt - 1999 - Cited by 1 - Related articles - All 2 versions
# [PDF]
STAHLBAU-BREVIER
File Format: PDF/Adobe Acrobat - Quick View
STEEL CONSTRUCTION BREVIARY www.stahlbau-brevier.de .... BAR page 1/21-1/22: Ultimate limit force of tensile and initial stress HV- and ...
www.stahlbau-brevier.de/musterseiten/STAB_content_overview.... - Similar
# [PDF]
Utilisation of the method of stress limit for designing the motion ...
File Format: PDF/Adobe Acrobat - View as HTML
By Eq. (42), the size of the limit force, is set where β = 1.3 is the factor of the tangential .... the American Institute of Steel Construction<u/> (steel ...
journals.uzpi.cz/uniqueFiles/00886.pdf - Similar
by D Herák - Related articles - All 5 versions
#
4 KudoZ points awarded for this answer.
Comment: "Thanks Textpertise!"
1 day 41 mins
threshold strength
http://www.patentstorm.us/patents/5938865/description.html
It is apparent from FIG. 4 that the threshold strength of SSC-resistance of any sample of test No. 1-15, using the steels of this invention, was higher than that of any sample of test Nos. 16-19 using the comparative steels, i.e., the SSC-resistance has been improved. Particularly, improvement of SSC-resistance of the steels containing W or V (steel "e", "n", "f" and "o") is large compared with that of the steel (steel "a") without these elements. The effect of W or V is apparent. The samples made of steels "g" to "m" with low level content of Si, Mn, P and S (test No. 7-13) showed an excellent SSC-resistance. Among them, the sample of test No. 13 made of steel "m", in which all contents of Si, Mn, P and S were restricted to extremely low level, has the most excellent SSC-resistance. It is clear from these test results that the SSC-resistance can be improved remarkably by controlling Si, Mn, P and S contents to low level.
Compare: threshold stresses
It is apparent from FIG. 4 that the threshold strength of SSC-resistance of any sample of test No. 1-15, using the steels of this invention, was higher than that of any sample of test Nos. 16-19 using the comparative steels, i.e., the SSC-resistance has been improved. Particularly, improvement of SSC-resistance of the steels containing W or V (steel "e", "n", "f" and "o") is large compared with that of the steel (steel "a") without these elements. The effect of W or V is apparent. The samples made of steels "g" to "m" with low level content of Si, Mn, P and S (test No. 7-13) showed an excellent SSC-resistance. Among them, the sample of test No. 13 made of steel "m", in which all contents of Si, Mn, P and S were restricted to extremely low level, has the most excellent SSC-resistance. It is clear from these test results that the SSC-resistance can be improved remarkably by controlling Si, Mn, P and S contents to low level.
Compare: threshold stresses
Note from asker:
| Thanks Saskia! |
Something went wrong...