Oct 25, 2015 22:42
8 yrs ago
English term
pinch edge
English to Czech
Tech/Engineering
Engineering (general)
příslušenství pro automobily
Pressing tools
A pressing tool is composed of an upper and a lower part.
The surface form of these two halves determines the shape of the component to be constructed.
When it is closed, the pressing tool shapes the blank into the finished component.
Depending on which methods and raw materials are being used, pressing tools can be either heated or cooled.
Options include punch and die cutting, pinch edges, sliders, tensioning frames and other appliances.
A pressing tool is composed of an upper and a lower part.
The surface form of these two halves determines the shape of the component to be constructed.
When it is closed, the pressing tool shapes the blank into the finished component.
Depending on which methods and raw materials are being used, pressing tools can be either heated or cooled.
Options include punch and die cutting, pinch edges, sliders, tensioning frames and other appliances.
Proposed translations
(Czech)
3 | řezná (pinčovací) hrana | Petr Kedzior |
4 | přítlačná hrana | Igor BURAK |
Proposed translations
13 mins
Selected
řezná (pinčovací) hrana
https://www.kks.zcu.cz/projekty-ver-fin/OPVK_PU/KA_03_publik...
--------------------------------------------------
Note added at 14 mins (2015-10-25 22:56:45 GMT)
--------------------------------------------------
nebo jen pinčovací hrana
https://www.kks.zcu.cz/projekty-ver-fin/OPVK_PU/KA_03_publik...
--------------------------------------------------
Note added at 15 mins (2015-10-25 22:57:58 GMT)
--------------------------------------------------
Slovo pinč je počeštěné z anglického slova pinch (štípat). Od toho se odvíjí názvosloví těchto nástrojů.
• Pinčovací hrana je vlastně střižná hrana nástroje, která oddělí vyráběný díl od odpadového materiálu.
• Pinčovací hrana je konstruovaná po celém obvodu vyráběného dílu a je umístěna přímo u hranice dílu.
--------------------------------------------------
Note added at 14 mins (2015-10-25 22:56:45 GMT)
--------------------------------------------------
nebo jen pinčovací hrana
https://www.kks.zcu.cz/projekty-ver-fin/OPVK_PU/KA_03_publik...
--------------------------------------------------
Note added at 15 mins (2015-10-25 22:57:58 GMT)
--------------------------------------------------
Slovo pinč je počeštěné z anglického slova pinch (štípat). Od toho se odvíjí názvosloví těchto nástrojů.
• Pinčovací hrana je vlastně střižná hrana nástroje, která oddělí vyráběný díl od odpadového materiálu.
• Pinčovací hrana je konstruovaná po celém obvodu vyráběného dílu a je umístěna přímo u hranice dílu.
Note from asker:
Díky! |
Déky moc! |
4 KudoZ points awarded for this answer.
Comment: "Díky moc!"
16 hrs
přítlačná hrana
tako jako "pinch roller" = "přítlačný váleček" na papírenských, textilních a mnoha jiných strojech, tak "pinch edge" je "přítlačná hrana", např. u přítlačné lišty, na stěrači apod:
https://www.google.it/#q="pinch edge" scraper
https://www.google.it/#q="pinch edge" scraper
Something went wrong...