Glossary entry (derived from question below)
English term or phrase:
(CB1) Tripped
Portuguese translation:
(CB1) desarmado
Added to glossary by
Lilian Magalhães
Feb 3, 2012 23:36
12 yrs ago
1 viewer *
English term
(CB1) Tripped
English to Portuguese
Tech/Engineering
Manufacturing
máquinas
SAFETY WARNING:
The following troubleshooting procedure may require that tests be made with the electrical enclosures open and power turned ON.
These tests should only be conducted by authorized personnel who are aware of the electrical and mechanical hazards present.
Check incoming power supply, is voltage present?
Is CB1 tripped?
Route power to unit.
Reset CB1 does CB1 continue to trip?
Check for voltage across T1-T2, T1-T3 and T2-T3, is voltage present?
The following troubleshooting procedure may require that tests be made with the electrical enclosures open and power turned ON.
These tests should only be conducted by authorized personnel who are aware of the electrical and mechanical hazards present.
Check incoming power supply, is voltage present?
Is CB1 tripped?
Route power to unit.
Reset CB1 does CB1 continue to trip?
Check for voltage across T1-T2, T1-T3 and T2-T3, is voltage present?
Proposed translations
(Portuguese)
4 | (CB1) desarmado | Salvador Scofano and Gry Midttun |
4 +1 | (CB1) desligado | Rebelo Júnior |
5 | (cb1) ativado/ligado | ghostwriter-BR |
Proposed translations
2 hrs
Selected
(CB1) desarmado
Entendo que o termo trip se refere a um dispositivo de proteção que se desarma em caso de falha. Como a designação do dispositivo seja CB, imagino que seja um Circuit Breaker (disjuntor) e portanto sugiro o termo desarmado.
www.proz.com › ... › Mechanics / Mech Engineering
2 jun. 2011 – (KudoZ) Portuguese to English translation of O protetor do motor desarmado (-41-) indica um sobreaquecimento deste que: the tripped thermal ...
www.proz.com › ... › Mechanics / Mech Engineering
2 jun. 2011 – (KudoZ) Portuguese to English translation of O protetor do motor desarmado (-41-) indica um sobreaquecimento deste que: the tripped thermal ...
4 KudoZ points awarded for this answer.
Comment: "thank"
+1
5 mins
10 mins
(cb1) ativado/ligado
Disjuntor CB1 ativado
--------------------------------------------------
Note added at 18 mins (2012-02-03 23:54:51 GMT)
--------------------------------------------------
Também:
O disjuntor CB1 disparou.
--------------------------------------------------
Note added at 18 mins (2012-02-03 23:54:51 GMT)
--------------------------------------------------
Também:
O disjuntor CB1 disparou.
Discussion
Check for voltage output at M1, is voltage present?
Overload (OL1) tripped, reset, does (OL1) continue to trip?
If voltage present across A1-A2, M1 is bad, replace M1.
Conveyor motor malfunction, replace motor.(OL1)