10:56 Dec 22, 2006 |
German to English translations [PRO] Tech/Engineering - Mechanics / Mech Engineering / Door technology | |||||||
---|---|---|---|---|---|---|---|
|
| ||||||
| Selected response from: Kim Metzger Mexico Local time: 13:02 | ||||||
Grading comment
|
Summary of answers provided | ||||
---|---|---|---|---|
3 | rasp tappet |
| ||
3 | Definition - not for points |
| ||
2 | file-down tappet |
|
file-down tappet Explanation: "latch area/plate with file-down tappet" or "latch area/plate with tappet to be filed down" -------------------------------------------------- Note added at 14 Min. (2006-12-22 11:11:21 GMT) -------------------------------------------------- latch + tappet is quite common |
| |
Login to enter a peer comment (or grade) |
rasp tappet Explanation: latch area with rasp tappet |
| |
Login to enter a peer comment (or grade) |
Definition - not for points Explanation: I don't have a translation, Alexander, but you can see exactly what a Feilnase is here: Feilnase In jedem Schließblech befindet sich eine rechteckige Öffnung, in die die Falle einrastet, wenn die Tür verschlossen wird. Da es selbst bei der besten Türmontage immer zu Toleranzen kommen kann, aufgrund derer die Falle im Schließblech zu viel Spiel hat (also bei Winddruck "scheppert"), sind die Öffnungen in den Schließblechen vielfach mit einer Ausbuchtung ausgestattet, der sog. Feilnase. Durch vorsichtiges Nachfeilen kann erreicht werden, dass die Falle dicht in das Schließblech greift. http://www.obi.de/de/onlineServices/Heimwerker-Lexikon/index... Schließblech – keeper plate, locking plate, striker plate -------------------------------------------------- Note added at 3 hrs (2006-12-22 14:07:12 GMT) -------------------------------------------------- Recessed strike plate? If the latch does not catch, close the door slowly to watch how the latch bolt meets the strike plate. The bolt may be positioned above, below, or to one side of the strike plate. (Scars on the strike plate show where it is misaligned.) It is also possible the door has shrunk and the latch no longer reaches the strike plate. Once you have figured out the problem, try one of the methods shown here. For less than a 1/8-inch misalignment of the latch bolt and strike plate, file the inside edges of the plate to enlarge the opening (right). http://www.hometips.com/articles/door_locks_knob_fixes.html A strike mechanism for a door lock comprising a recessed strike plate (9) which in use is fitted into a door jamb to receive a latch bolt (14) and a strike (10) which is pivotal between a first position in which the bolt (14) is held within the recess and the door is locked shut and a second position in which the bolt (14) is released so the door may be opened. http://www.freepatentsonline.com/5219196.html Lock: Bottom fitting deadlock with recessed strike plate. http://www.dot.state.ia.us/procdist/lt00339web.pdf |
| |
Grading comment
| ||
Login to enter a peer comment (or grade) |
Login or register (free and only takes a few minutes) to participate in this question.
You will also have access to many other tools and opportunities designed for those who have language-related jobs (or are passionate about them). Participation is free and the site has a strict confidentiality policy.