Blind Dialing
Blind dialing lets you dial regardless of whether the modem detects a dial tone. Turn on blind dialing by inserting X3 into your software initialization string immediately before the telephone number. This setting disables any "Detect Dial Tone" feature in your communications software.

If you are using Windows 95 dial-up networking, follow these steps to turn on blind dialing:

http://www.usr.com/support/3cxm756/3cxm756-ug/3C756-5.htm#23...

--------------------------------------------------
Note added at 2003-12-02 14:09:02 (GMT)
--------------------------------------------------

Carla, ao colocar a palavra no glossário, seja quem for o felizardo ganhador dos KudoZ, coloque \"dialing\", com apenas um L.

--------------------------------------------------
Note added at 2003-12-02 14:18:28 (GMT)
--------------------------------------------------

This command determines which set of responses and calling characteristics are used. This command determines whether the modem recognizes dial tones and busy tones, and what kind of result code should be enabled. When n is 0, 1, or 3, the modem waits for the time specified by S-Register 6 (default 2 seconds) after going off-hook, then dials regardless of the presence or absence of dial tone. Blind dialing is used in some countries where dial tones could very from central office to central office, or for certain PBX\'s which generate unique dial tones.

http://www.modem.com/glossary/extend2g.html

:) chute com base no seguinte site:

Sends CONNECT message when a connection is established by blind dialling
ATX1 Modem ignores dial tone and busy signal. Sends CONNECT ...
www.qdscanada.com/mdm_htm/manuals/at.htm - 67k - Em cache - Páginas Semelhantes

(Proponho)
Presupõe-se: espera de sinal [de marcar, ou equiv]
"Direta" é outra coisa.
"Imediata" está, parece, livre de outros usos; mas é fraca de especificidade.

ok